PDA

View Full Version : KF2 Spares


alport
12-03-2015, 08:38 AM
HI,
I ordered recently a kf2 to have something different in my country (Turkey) I won't have any local support at least for a while so should stock some spares to end up the races. I race only 13.5t superstock on a tight indoor carpet track with medium grip level.
-My budget is limited so I should buy as few as possible spare parts. I assume Wishbones, hubs (don't know ıf I would need all 3 of them ?) rod ends are must have. What about front shock shafts, hinge pins, front bulkhead , belt or any other parts ?
-For setup I will order 5 degree yokes and some springs but don't know which springs should I have for my conditions described above . I'm totally unfamiliar with the car and brand :confused:

Paul Field
12-03-2015, 10:01 PM
Hi
The first thing to buy are the 5 degree alloy yokes. These are a must have item.
Front wishbones
Front hubs
Rear wishbones

I have not broken much on the KF. My personal list of spares would include:
Spur gear
Belt
Front and rear shock towers
Front wishbone pivot pins inner and outer.

I hope this helps

jonathan may
12-03-2015, 10:43 PM
I and I know a few others have broken front axles

Chris Elworthy
13-03-2015, 09:00 AM
There does seem to be a problem with the manufacturing on the KF2 front axle. I had one shear off completely by just turning into a corner! Fair play to Schumacher who sent me out some replacement axles (from the KF) free of charge.



Chris

alport
13-03-2015, 09:29 AM
I'll try to put some other brand Cars (yokomo or Team c) front axles in first built, they will fit ok İ think