will this work and what lipo battery

[nivlacf1]

what battery should with a 13 amp esc and 13.5t brushless motor not sure if this will even work been out of the sport for 20 year and only just got back into it,thank in advance for any advice, i also have a 35 amp esc but was hoping to save that for another car,all advice would be great thank you

[beale]

A 13A ESC should only be for a micro 1/18th scale or so, people even use 35A ESC's in micro's but with a 13t motor you would be fine in 1/10th.
What cars are you talking about and what motor have you set aside for the other model?
You can pick up 35A Ezrun esc's for around £26in the UK

[nivlacf1]

they are for an xray t2 and a shumacher tt 1/10

[Dombrasky]

never heard of a 13a esc before...be carefull as newer esc`s have a lipo cutoff built inside to stop them discharging too far and catching fire!!

[nivlacf1]

sorry its an 18amp must of hit the wrong button lol

[dodgydiy]

you'll need a 35 amp minimum for the t2 on 13 turn, the 18 amp is only really any good for 1/18 scale as said above, if its the ezrun speedo's you are looking at then the 18 is weak, 35 however is very good and is what i use at club (xray t4, 13 turn, 35A esc)

[nivlacf1]

the 18a just says a hobbywing and the 35a says hobbywing ezrun, thanks for the advice