Log in

View Full Version : Yz2 gearing


Lee24h
11-04-2015, 08:40 AM
im going to run a 10.5 in my yz2 what sort of gearing do people reckon
As a good base
Cheers

ralphee
11-04-2015, 09:00 AM
Id like to know a few 10.5 options too!

Lee

neallewis
11-04-2015, 10:34 AM
26-28 will be about right. depends on if you are running blinky or timing/boost in esc. bigger pinion, smaller spur if blinky spec racing.
I used to run 26 ish with a 10.5 in my bmax2, and add some boost if I needed more.

ralphee
11-04-2015, 03:11 PM
Thanks Neil, i running 27t at the moment, so im in the ballpark, not running any boost, ill only crash more lol.

lee

neallewis
11-04-2015, 05:35 PM
Thanks Neil, i running 27t at the moment, so im in the ballpark, not running any boost, ill only crash more lol.

lee

Yup leave it that and run it. providing motor doesn't come off scorching hot you are good.

The Doctor
18-04-2015, 03:48 PM
Gearing is also dependent on track size & layout, so try to gear so you hit top speed just before the end of the straight, whilst allowing good acceleration through the infield.