10electric, Cullingworth booking in Friady 24.4.15

[jameswilkinson7]

Hi all.

Please use this thread to book in for racing on Friday.

Unfortunately we need to put a cap of 30 drivers in place to make sure we have enough time for 4 rounds and a final.


We should be able to have the heats sorted and we will want to start racing at bang on 7. So track building is the priority.

We need more volunteers to collectively help build / dismantle the track, this also applies at the end of the evening putting away the track. So please help, we get more racing in and get to go home at a reasonable time. Don't leave it to the same individuals to do the honours.


Please refrain from practicing until the track has been built.


The deadline for booking in is 9pm Thursday evening, heat listings will be compiled after this time. If you say you are coming then change your mind for what ever reason, you must let me know as this affects everyone else & the heats will not be evenly balanced,



Doors normally open at 6.30pm.

Someone will be there for 6:15 ish, so anyone wanting to HELP with the track can get there for then.

1/10th Buggies, indoors, carpet, slippy floor and jumps. Family friendly and good fun club level racing.

Address:
Cullingworth Village Hall
Station Road
Cullingworth
Bradford
BD13 5HN.

Visit site for other details: CLICK HERE (http://www.10electric.co.uk/)

[jameswilkinson7]

2wd
1 Nori
2 John
3 Jon
4 Peter Rhodes
5 Brian Colman
6 Mark Goulding
7 Megan Casey
8 Ellis crossley
9 Craig Tillotson
10 Alistair Cooper
11 Rob Cooper
12 Paul Dignan
13 Ian Dignan
14 Karam
15 Mark Newell
16 Jacob Baldy

4wd

[bricol]

Peter Rhodes 2WD
Brian Colman 2WD

[MarkGoulding]

Mark Goulding - 2wd
Megan Casey - 2wd

Has anyone got a sensorless motor I can borrow to check my ecs(the one in it is 3300kv about 13t), I have move my motor and esc from my car to Meg's, didn't have to solder anything just moved it in one piece, and now when you put the smallest amount of resistance behind the motor it stutters,

Have done some obvious checks
-swapped the batteries for fully charged ones
-changed to different servo and without servo
-changed transmitter and receiver
- and have moved the motor away from the spur to make sure it wasn't a drive train problem,
and still the same problem,

If any one has any other things a can check before Friday I will give them ago,

Thanks

Mark

[dazt21]

Ellis crossley 2wd please

[Tilly]

Craig Tillotson 2wd

[SC truck guys]

Alistair Cooper 2WD
Rob Cooper 2WD

[Ashlandchris]

Mark Goulding - 2wd
Megan Casey - 2wd

Has anyone got a sensorless motor I can borrow to check my ecs(the one in it is 3300kv about 13t), I have move my motor and esc from my car to Meg's, didn't have to solder anything just moved it in one piece, and now when you put the smallest amount of resistance behind the motor it stutters,

Have done some obvious checks
-swapped the batteries for fully charged ones
-changed to different servo and without servo
-changed transmitter and receiver
- and have moved the motor away from the spur to make sure it wasn't a drive train problem,
and still the same problem,

If any one has any other things a can check before Friday I will give them ago,

Thanks

Mark

is it speed passion with plugs? have you got the A,B&C correct - if you mix them up it will stutter horribly

[pddiggy]

Paul & Ian Dignan - 2WD please

[MarkGoulding]

Thanks Chris. The motor and the esc are the the reedy ones that come with the ready to run b4.2. Both the esc and motor have the wires pre fixed and are joined in the middle with 3 small connectors. I have had another look at the motor and there was some insulation tape hiding some poor factory connections. Will have a closer look at this tomorrow.

Thanks again for the pointers

Mark

[neallewis]

Neal 2wd

[J77MYF]

Are you not racing on Saturday Neal?

Neal 2wd

[Newell]

Mark Newell 2wd
Jacob Boldy 2wd
Sorry about the late message.

[Danny Harrison]

Neal 2wd

Keen Neal with a 6am start :)

[Tilly]

Good nights racing last night guys thanks, lots of rounds too which was good. See u all in a few weeks

[neallewis]

I bet i missed a good quiet night with lots of racing.

[Tilly]

Yeh there was only 3 heats so we got quiet a few rounds in and did bump ups

[archtech]

Was a great racing night, thx john for the advice after I won the d final it helped me lead the c final for about 2 laps..right before my battery gave up :'( from now on im charging all the night :) .