ESC Fan

[Ritchie T]

Im after a 25x25x7mm esc fan like this:

http://www.ebay.co.uk/itm/LRP-ESC-Fan-25x25x7mm-Inc-Screws-LRP82512-/361325098534?pt=LH_DefaultDomain_3&hash=item5420a77626

Only not £11.31 :cry:

Doesn't matter what brand as long as its this size and has the same connector

Tarr :)

[HarlowS]

you can cut and solder the connector so could use most fans that size.

[Ritchie T]

Im struggling to find that size to be honest other than the LRP one I linked regardless of connector

[redtyson]

ebay
type Hobbywing fan
or go on ebay.com you have it in 3 days

[DynaMight]

I bought some of these before: https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=43748

Actually last longer than the original Hobbywing fan it replaced, not any noisier either. I think the connector looks the same too, but you can always cut & solder the connectors.

Delivery wont be super quick, but in my experience they come between 7-10 days & at under £1 each, just buy a few to make it worth your time. I usually also buy some hex screwdrivers like https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11063 to make up the weight.

[Ritchie T]

Theyre 10mm I need 7

[Welshy40]

Much more do some

[mattr]

Have a look at pc components, I think they use small fans like that on GPUs.

I bought a bag of 25*25*7 fans for about 4 dollars a fan a couple of years ago.

[andyg01]

I am sure we have some spare ..... i'll have a look and let you know :thumbsup:

[Ritchie T]

Thanks :)

[andyg01]

Sorry, did look, ... I am sure they will turn up and I will let you know

[andyg01]

Ha .. it surfaced 25x25x10.5mm ??

vtec 0.16a, 4.8-7.2v 13,000rpm

Will go on ebay ... perfect working order and no damage

HTH

Andy

[OneKiwi]

3racing have 7mm fans.
I found some on ebay a while back

[InsideLineModels]

We have plenty of Team Orion 25x25x6mm fans. Not exactly what you are after but close... and only £4

http://insidelinemodels.com/images/stories/virtuemart/product/ori65021_team-orion-cooling-fan.jpg (http://insidelinemodels.com/inside-line-shop/electrical-equipment-and-accessories/cooling-fans/orion-r10-pro-cooling-fan-25x25x6-p)

[OneKiwi]

Very nice Ill be looking at ordering a couple of those at some point.
Don't the + and - need to be switched if using a HW esc?

[InsideLineModels]

Yes, good point, you will need to check the polarity against your previous fan, you can easily swap them round within the connector though.

Kev