Setting Orca Vx3 endpoints

[l1am]

Hi,

As title says, I'm looking for information on how to set the endpoints for my transmitter. I can't make any sense of the manual and there's no buttons on the ESC

Any help would be great!

[dobber]

Switch on the esc.
Hold full reverse on the tx.
Switch on the tx, still full reverse.

If you do that the esc will chirp.

Do full forward on the tx
The esc will chirp

Release and go to neutral, again it will chirp.

Switch off then back on and all will be done.

[l1am]

When I do that I don't got the chirp, I have tried reversing the throttle too as the manual says. When I turn the ESC on the wheels are already turning slowly so when I turn my tx on with the brake full on the wheels just stop (the brake comes on) bit no chirp?

Thanks