Help with Speed Passion GT2 and hobbywing program card

[Suzukitudor]

Hi all.

Wonder if I could have some help regarding a Speed Passion GT2 and Hobbyking program box.

I updated the software recently on the ESC which has allowed turbo, turbo slope, rpm delay, turbo timing etc, but I am racing modified class 1/10 offroad buggies and am pretty sure this software is for stock class and basically has too many programmable parameters. I run 7.5 motors which are plenty quick enough without all of the above.

I can program the ESC via plugging the program box into a laptop and the ESC into the program box, but I can't get the box on its own to program or recognise the ESC - it keeps saying wrong software.

I would really appreciate some idiot advice on which software to run on the ESC and program card that is most appropriate for 1/10 offroad modified motors which will allow the box to talk to the ESC.

I have been on the hobbywing and Speed Passion websites but the amount of downloads are pretty confusing. It's a bit more complicated than it was in the early 90's!

Thank you.

SZ

[bigbaza555]

Hi I have the same speedo as a spare and did the download you need to check what version of software you have uploaded to the speedo i.e V3.1?? but the older software is what you need to use as newer versions don't work I think I got V2 or some thing like that also make sure your program box has been uploaded to the same software as the speedo or you cant use it. hope that helps.:thumbsup: