PDA

View Full Version : Video of my Optima Mid competing against the modern cars at Worksop 15/11/2015

J77MYF
19-11-2015, 11:36 AM
Just a quick video my friend took of my Optima Mid racing against the modern 4WD buggies at round 2 of the Worksop Indoor Master series. Was sat in 45th out of 90 4WD racers at the end of round one. Ended up finishing 53rd and I'm pretty happy with that. Roll on the next one.

Old cars are like a fine wine, they just get better with age :thumbsup:

https://www.youtube.com/watch?v=sqpwi3vA0B0
oli4ke
19-11-2015, 03:33 PM
Nice vid Jim!:thumbsup:
Car runs smoothly, what's under the hood?:)
J77MYF
19-11-2015, 04:15 PM
Hi Oli,

thanks for that :thumbsup:

It's running an Orca 10.5T brushless motor with an old Speed Passion LPF speed controller. The modern cars were taking chunks out of it down the straight. I'm tempted to try a faster motor but then I don't want it to become unreliable.

What have you run in yours?
Danf1275
19-11-2015, 05:53 PM
Looks well.

Have you tried the 3d printed wishbones yet? - i've had an order for another one from someone
J77MYF
19-11-2015, 06:29 PM
Not yet but I'll try to get them fitted for Batley on Sunday. Really hope they work

Looks well.

Have you tried the 3d printed wishbones yet? - i've had an order for another one from someone
OptimaFan
22-11-2015, 07:32 AM
Runs nicely. Straight line speed seems to be the only issue. What were the other drivers running?
J77MYF
22-11-2015, 08:22 AM
Runs nicely. Straight line speed seems to be the only issue. What were the other drivers running?

I think they're all running 6.5's or possible lower. I'm running a 10.5. Thinking about trying a 7.5 but I don't know how long the transmission will last?
OptimaFan
23-11-2015, 06:38 PM
I think they're all running 6.5's or possible lower. I'm running a 10.5. Thinking about trying a 7.5 but I don't know how long the transmission will last?


Are you still running the stock "slipper" clutch? I think that, along with the center gear, are the weakest links in the transmission. Maybe you can keep the transmission safe with reducing punch power, so the gears get less of a "jolt" when you do a throttle punch. Or convert to a modern slipper clutch, like Daniel Rowlands is running.
daz75
28-11-2015, 04:32 PM
Good old worksop looks the same as it did when I raced back in the day