Transmitter Bling

[Big E]

Not sure if I should put it in here but hey ho :confused:

Just got my transmitter back from Decal Designs and it looks really sweet!!!

Check out the web site and bling away :thumbsup:

E

http://www.decaldesigns.co.uk/

[super__dan]

Beyond!

[Stu]

Using that will be like being on crack.

[strobe]

Looks Ace.
Wont be hard finding it in the transmitter compound at a National.

Good price at £20 + £2 postage. More to come soon. Futabu 3VC next?

[Cockerill]

Beyond!

You need yours done Dan, so you don't lose it :lol:

[ben]

Just sent my details off :thumbsup::eh?:

[DCM]

already ordered my 3VC one!!! woohoo!!!

[blitzboy]

must say i spoke to kev yesterday and he was well happy with it might have to do mine when i upgrade :thumbsup:

[neiloliver]

Wow! - Kevin strikes again!

[Welshy40]

Transmitter pornography!!!!:thumbsup::thumbsup:

[ashleyb4]

Very nice indeed.

A

[_JP_]

looks cool, would like to see the 3vc one as mine is looking tired now :)

[GRIFF55]

lurve it!!!! Kevs going to be getting an email:thumbsup:

[niggs98]

already sent one for my 3vc as they look the nuts ;)

[Rich D]

Looks awesome. This may be a silly question but are these self-fit ? Im guessing that they must be at the price but Ellis says " just got it back". Does he have staff to do these menial tasks :lol: ?

Im having one too regardless :thumbsup:

[Big E]

Looks awesome. This may be a silly question but are these self-fit ? Im guessing that they must be at the price but Ellis says " just got it back". Does he have staff to do these menial tasks :lol: ?

Im having one too regardless :thumbsup:

They are self fit but they are all pre-cut for you to just stick on in the correct place.

I had "staff" in this case as Kevin used my transmitter to model them all on...however I have to fit them myself in the future as I have a spare set in case I damage mine :cry:

Must remember to look at my car when I am racing tomorrow rather than admire my transmitter up on the rostrum :thumbsup::wub

E.

[Decal Designs]

Sorry, Jimmy if I should not be replying to this post.

Hi Rich
Yes, they are self fit. The reason Ellis says he just got his transmitter back from me is that I used his transmitter to make the templates from, so I fitted the skin on for him to make sure everything fitted correctly.
As long as you don't press the decal down too firmly, you can carefully peel up the decal and reposition it before finally rubbing it down when you are happy.
As for having staff for the menial tasks. It's just me and the wife and she does not have the patience to stick on the skins. But don't tell her or I will be toast. :p She does help a lot with other things though.

Kev

[mark christopher]

Kev if you need a KO helio, ill lend you mine !!

will be in touch about a big banner soon

[Rich D]

Great !

Thanks for the info guys - I will be in touch soon with my design and details.

ATB

Rich

[Darren Boyle]

We have been speaking with Kevin about these for a while and it is nice to see the first one (Ellis's) complete and on the tranny

My own personal one has left Decal Designs and I cant wait to get it fitted.

We will be offering them at the same £19.99 price tag too through the shop and course postage can be combined with your regular orders too.

[birdy]

wing skins coming soon aswell can't wait.

[Decal Designs]

Thanks, Mark I have already had some enquiries for the KO Helios transmitter skin, so when I am ready I will be in touch, if that's ok?

Just started work on the 3VC Template, so hopefully this will be available soon, but it will take longer to make the template as the shape is a lot more complicated than the KO Esprit 3.

Darren is correct you will be able to order the transmitter skins from him as well as direct from me.

Kev

[mark christopher]

Thanks, Mark I have already had some enquiries for the KO Helios transmitter skin, so when I am ready I will be in touch, if that's ok?

Just started work on the 3VC Template, so hopefully this will be available soon, but it will take longer to make the template as the shape is a lot more complicated than the KO Esprit 3.

Darren is correct you will be able to order the transmitter skins from him as well as direct from me.

Kev
no problem kevin

[Rich D]

Just ordered mine :thumbsup:

[telboy]

Very nice.
Anyone know what machine he uses?

Its my 'printing geekyness' coming out! lol

[Decal Designs]

Hi Tel
Roland Versacamm SP300V.

Kev

[Darren Boyle]

Oh right, one of them :p (like I am now so much wiser in a sarcastic way)

I thought Roland made musical keyboards, not vinyl printer/cutters LOL

[Decal Designs]

Same company, Darren. Like most of these companies in Japan they make lots of things. Just look at Hitachi want a HiFi and a very large truck to take it home in and a even bigger ship to carry the truck to the UK. :p

[Rich D]

Its certainly not a PC World carry home jobbie is it !? :drool: :lol:

[Decal Designs]

Not unless your name is popeye and you've had your spinich.:lol:

[Rocking Donkey]

Does that Tx look like a transformer to anyone else?

Autobots - Roll out

[jonny123]

hi kev in the future will you be making the skinz for other transmitters. eg i would love one for my spektrum DX3.0. It looks awesome.
what kind of prices do you charge ?:woot:

[Decal Designs]

Yes, I hope to do them for the Spectrum radios a bit later. They should be around the same price of £20 +P&P.

Kev

[jonny123]

cheers kev.
pm me when the time comes that you design 1 for spektrum transmitters.
id love a custom skin for my dx3.0

[_JP_]

Any pics of the 3cv ones yet?

[Garry Driffill]

Id like to have my Sanwa M11 done - Is there a skin made up for it?

[David Church]

I saw Ellis's handset today, I think it looks much better than the picture!!!!:D Good job!!!!

[ashleyb4]

We used to have a vinyle cutter like that one at school.oooooooo

A

[Decal Designs]

Thanks David
Hi JP I am working on the 3VC template at the moment as soon as it is finished, I will make a skin for my 3VC and post it for everyone to see.

Hi Gary Sanwa M11 will be done but a little later, need to get hold of one to make the template first.

Hi Ashley its a printer and vinyl cutter all in one.

Kev

[ashleyb4]

OoOoOo does really nice decals then ive actually got two sheets of your decals infront of me.

A

[Decal Designs]

Here is Darren's KO Skin so you can see how it will be laid out. The Blue lines are where the skin will be cut.

Kev

[Darren Boyle]

WOW.........................

Kevin, get off oOple and the Pc, get in your car and drive it here to me in Watford!!!! It would only take you around 4 ish hours from Plymouth at this time of night, if the traffics good you could be back home by 4am!!! I'll go and get the keetle on for you..... LOL :woot:

[Lee]

Get him to do one for me darren and you can hop in your car and bring it up to me, i should have it by 9am :lol:

[Chris Doughty]

Sanwa Exzes Skin???

it looks pretty good Ellis, but I am sure a Sanwa skin would be better :p

[Darren Boyle]

LOL @ LEE

You are the one with the Ferrari, you drive to Plymouth, come back via Watford and drop mine off on the way.........

Anyone else want one while Lee is on a road trip????

Kev, from design to delivered in under 24 hours via Farrer Couriers, now theres an idea (Lee your new job is all sorted for you mate)

[Decal Designs]

Hi Darren
Can you supply the matchsticks for my eyes and a dozen cans of red bull for the trip home again? :p:woot:

Hi Chris
Sanwa Exzes skin will be coming, when I get hold of one to make the templates from.

Kev

[Lee]

I would have to remortgage for the fuel bill.

The range rover is down to 11mpg now :lol:

[telboy]

Hi Tel
Roland Versacamm SP300V.

Kev


Ah, we used to have one of the BIG ones at my old workplace. Stunning peice of kit...but not cheap!!:D

[Decal Designs]

Here is the skin for Richard Drury.

Kev

[ben]

loookin gurddd

[blitzboy]

Here is Darren's KO Skin so you can see how it will be laid out. The Blue lines are where the skin will be cut.

Kev

cant wait to see what mine will be like looking good kev

[Decal Designs]

Here's another

Kev

[Rich D]

:D :wub

[birdy]

Just got mine in teh post today, Looks really good, will post some pic's later.

[GRIFF55]

Here's the finished article!! Exactly like my shells:drool:, cheers mate

[Decal Designs]

Glad you liked it Andy. Darren from DMS is sending me a Spectrum module, so I can make a template for that instead of the standard KO module. Any of you guys that have already received your KO skins from me that have a spectrum module fitted to their radio, let me know and I will send a skin for that to match and also another arial section to cover up the hole free of charge. If you are still waiting for your skin or proof, please let me know if you are using a Spectrum module so I can add that skin in your order after I get the module from Darren.

Kev

[DCM]

can't wait for the 3VC unit, can you do them with a Spektrum module bit too Kev?

[Decal Designs]

I will have to talk to Darren very nicely and see if he has the Futaba Spectrum module as well.

Kev

[DCM]

it is the one for the 3PK as they don't do one for the 3VC.... but the 3PK one fits just as well, can't wait, you got my email didn't you Kev...

[Rich D]

Here's the finished article!! Exactly like my shells:drool:, cheers mate


Nice Andy !

Ill post some pics of mine when it arrives - its on its way :)

[Decal Designs]

Yes I got your email, just need to clear the backlog of KO skins then I will finish the 3VC template.

[DCM]

TOP MAN!!

[Chrislong]

Looks sweet as dude, you got matching shorts? far bettetr then that single colour stick on gash, I seen a yellow tranny somewhere, some homo.

[Rich D]

Pics of my tranny :wub

http://www.zen174713.zen.co.uk/Tranny%20%281%29.JPG

http://www.zen174713.zen.co.uk/Tranny%20%282%29.JPG

http://www.zen174713.zen.co.uk/Tranny%20%283%29.JPG

http://www.zen174713.zen.co.uk/Tranny.JPG

[MikePimlott]

looks good apart from the TRF416WE bit. shame on you :p

[Rich D]

:lol: :p :blush:

[Lee]

Looks sweet as dude, you got matching shorts? far bettetr then that single colour stick on gash, I seen a yellow tranny somewhere, some homo.



I think you mean Wraggys :lol:

[ben]

Just got my bling*bling this morning :eh?: Looks ace, thanks Kev :D:D:D

http://www.oople.com/forums/picture.php?albumid=232&pictureid=1258

http://www.oople.com/forums/picture.php?albumid=232&pictureid=1259

http://www.oople.com/forums/picture.php?albumid=232&pictureid=1260

Ben

[blitzboy]

ben thats well sweet nice one kev can t wait to see what you do with mine

[Belsten]

how easy are the skins to take off if you change colours/sponsors etc ?

[blitzboy]

Pics of my tranny :wub

http://www.zen174713.zen.co.uk/Tranny%20%281%29.JPG

http://www.zen174713.zen.co.uk/Tranny%20%282%29.JPG

http://www.zen174713.zen.co.uk/Tranny%20%283%29.JPG

http://www.zen174713.zen.co.uk/Tranny.JPG


hmmmmm i think we need to talk rich

[MChandler]

Hi,

Will you be doing a Decal for Spectrum DX3s in the near future?

I am Very interested in purchasing decal for my Tranny

Thanks

Matt

[Rich D]

hmmmmm i think we need to talk rich


You lost me Graham ? :confused:

[Rich D]

how easy are the skins to take off if you change colours/sponsors etc ?

Easy to fit and remove, took me about an hour to fit it accurately. Its a thick vinyl, looks pretty durable and at the price i think that they are a bargain.

HTH :D

[blitzboy]

You lost me Graham ? :confused:

lost myself mate cant remember your shell design ,doh and cant find the piccy either hahahahahaha

[Rich D]

Ive got/had about 8 designs as my TC shell gets replaced every few months due to weekly hammering and the buggies only get ran at Worksop.

Dont take it personally if im not always running your shell - ive got several new ones here never fitted/used.

I get my TC shells from the USA. Those lights are painted :wub

http://www.zen174713.zen.co.uk/TouringCar.JPG

:)

[birdy]

Here's Mine, I used some more of the Decal on the back.

http://img.photobucket.com/albums/v492/burdess/P1010033.jpg

http://img.photobucket.com/albums/v492/burdess/P1010034.jpg

[Decal Designs]

Hi Ben glad you like it, one little thing on the side view you got the little sticker at the bottom of the pic upside down;)

Belsten, if you want to remove the skin, if it is within 24 hours it should just peel off. But if you gently warm the skin with a hair dryer( NOT A HEAT GUN ) it should peel off easily and leave no sticky mess behind.

MChandler, Spectrum DX3 should be coming a little later, after the Futaba 3VC and Sanwa Exzes Plus, but will need to get hold of one to make the templates.

Kev

[ben]

Hi Ben glad you like it, one little thing on the side view you got the little sticker at the bottom of the pic upside down;)

haha woOps, sorted now :blush: I think i put it on the right way to start with aswell :lol:

[Decal Designs]

Just finished this one for Adam Skelding.

Kev

[blitzboy]

looking good there kev , any news on my bits name tags & logo s yet mate cheers

[Decal Designs]

This one I did for Juan José Cáceres in Spain.
Hi Graham, Should have your stuff sorted tomorrow.

Kev
http://www.decaldesigns.co.uk/img/Juan-Jose-Caceres-Custom-KO-TX-Skin.jpg

[ashleyb4]

WOW

A

[Decal Designs]

Here's another I did for Dave at No Limit RC UK.
Kev

http://www.decaldesigns.co.uk/img/No-Limit-RC-Custom-KO-TX-Skin-Large.jpg

[Decal Designs]

I would like to apologise to all my customers that have experienced a delay with their orders and emails being answered. I have taken over running a model shop and have been very busy getting everything sorted out and a bit of a disaster at home with drain that flooded a property below where I live. I am starting to catch up with the backlog of orders and requests and if you have been patiently waiting for a reply to an email from me I should be in touch soon.
Thank you for your understanding and I am sorry for any inconvenience.

Kevin
Decal Designs

[blitzboy]

cough , :yawn:fully understand mate , could do with an update if you can buddy cheers g