View Full Version : Silverstone set up K2
madmulc
12-01-2016, 01:14 PM
Hi,
I am after a set up for the K2 for Silverstone, I have looked on all the usual sites for any existing setups but could not find what I was looking for.
Any help would be greatly appreciated.
Cheers :thumbsup:
danmurphy
12-01-2016, 04:47 PM
I would start with this and work from there. Diff oils might need to be slightly thinner as its usually a slightly smaller, tighter track than the worlds track
http://site.petitrc.com/setup/schumacher/setupcatk2/K2_MichalOrlowski_YatabeArena20150310/
The_chosen_one
28-02-2016, 08:36 PM
This was my setup I used at the BWOC if it helps
http://i1286.photobucket.com/albums/a615/William_Venables/K2%20BWOC%20setup_zps7j4dfnnn.png (http://s1286.photobucket.com/user/William_Venables/media/K2%20BWOC%20setup_zps7j4dfnnn.png.html)
One thing I did to the front roll bar was tightened the screw all the way down so the plastic bit doesn't move and made sure the plastic bit was leaning towards the car. Then the front roll bar was able to work how it should.
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.