Help with finding charger

[spud--1]

Hi, im pretty new to this rc stuff and purchased a traxxiss stampede second hand from ebay, it came with a TRAKPOWER 11.1v lipo battery.

What i would like to know is can i use any charger/balancer with this battery or do i have to buy a trakpower one because of the connections?

I was looking at something like this http://www.wheelspinmodels.co.uk/item/O-IP2851-Pro-Peak-Sigma-EQ-LiPo-NiCd-NiMH-Charger-240V-And-12V-Input__3370/

would this be ok?

Any help appreciated,

[rcmadd]

yes that should be ok if connectors dont match you can always make one up

[spud--1]

ok great thx, so to make one up you just snip the wires and solder the correct connector on? Also are the balancing ones standard?

cheers

[rcmadd]

i dont know if all are the same but my lads and mine are and we have diffreant lipos

to make up a lead dont cut any off your battery
i would suggest if you have to make a lead up is to go to your lhs and get whatever bits you need from them

most of the time you get what you need with the charger

[spud--1]

ok, thx is your balancing port like a little square thing with 4 connections and a little clip on the side?

cheers