tool set

[mattcaney]

Does anyone make a descent nut driver and hex druver set for sensible money. Need to get a decent tool set up for my KF2.

[Ashlandchris]

Arrowmax do decent stuff. I started with a set from "dynamite" (I think) which had various drivers with a ratchet handle.
eBay has lots of sets
http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2050601.m570.l2632.R2.TR6.TRC2.A0.H0.Xrc+ tools.TRS0&_nkw=rc+tools&_sacat=2562

Typically you will need 1.5 2 2.5 mm Allen key, 5.5 and 7mm socket. Not had a Schumacher so can't say for sure
Body reamer useful

[mattcaney]

Thanks any other recommended tools ?

[D20MCK]

I use these, they are a really good fit. I was surprised how good they are.

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=84089

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=84054

http://www.hobbyking.com/hobbyking/store/catalog/43600_1_m(5).jpg
http://www.hobbyking.com/hobbyking/store/catalog/43614_1_m.jpg

[Stilli]

I use the Arrowmax tools and have found them to be very good, available locally too.