Advice needed Reedy 410R

[Roscopeco]

I'm having trouble with my 410r ......

I bought it 2nd hand and fitted it into my k1 aero , turn the power on and it will work however it won't brake .

I've read the manual on setting it up and even watched a video on YouTube but I still can't get it to set the brakes . In set up mode one flash on green light to set full throttle , 2 flashes to set neutral and 3 for brakes .

It won't get passed 2 flashes ( setting neutral )

Getting aggravated :(

Can anyone help ?

[Zipper]

Maybe end points on your transmitter? Can you turn the brake up, if so put it to max and try to re calibrate.

[Roscopeco]

Maybe end points on your transmitter? Can you turn the brake up, if so put it to max and try to re calibrate.

I checked my epa and both throttle and brake are at 100% like it says in the manual .

[dazp83]

Have you got any expo on the brakes?

[Roscopeco]

Have you got any expo on the brakes?

I'm not sure what you mean ?

Im not sure what I did differently but I've managed to get it to set brakes . It's In the wrong default set up for buggies but I have brakes now which is a start .

[BNT]

My five cents worth...if you are still not getting enough break, also check your pinion size as larger pinions are more difficult to slow down.

[steveproracing]

From memory some brands of radio gear need the servo reverse switch turning to opposite. Then re calibrate. (It's a vague memory though so I may be wrong.)