PDA

View Full Version : 10.5 Gearing


3975dave
17-01-2009, 08:01 PM
Where should I gear a Novak 10.5 with 91t spur in the Durga?

General Accident
26-01-2009, 09:38 PM
Maybe start with a 20t pinion and see where you go from there, if its maxxing out half way down the straight, go up a tooth but just keep an eye on the motor temp. On a 6.5T Novak we run 17 (tight track) and an 18 just about everywhere else as its such a ball ache swapping pinions over.

AaronR
27-01-2009, 06:28 PM
I think a 20T is accurate. I would have to look at the gearing chart on the sticky thread above, but according to the Novak Brushless guide on their site, it should be around 8.0 FDR for 4WD off-road vehicles.

Nixpus
12-02-2009, 08:47 AM
Im going to jump in and ask the same question for an eZrun 9t with 35A ESC :)

The hobbywing site doesn't really give any hints in regards to gearing of 1/10 4WDs.