Track star 80amp esc with 13.5 motor combo

[corsa148]

Had a few of these track stars but the 120amp versions and had know bother but fitted this one for a friend and when trying to set it up once I have set the nutral zone then try to set full throttle it will not set the only way it will if I do reverse then throttle but as you can imagine you have full throttle in reverse any help would be great

[mattr]

Reverse the throttle channel on the radio, then start again.

[mattr]

Or change the rotation direction of the motor (if you can do so on the ESC)

[corsa148]

Tried both no joy esc will not let u motor just cogs

[mattr]

If it's cogging I'd try factory reset, new sensor cable checking the power cables are right. Then new motor.

[corsa148]

If it's cogging I'd try factory reset, new sensor cable checking the power cables are right. Then new motor.

Only gogs when u change 2 of the wires otherwise the motor is fine

[mattr]

If it works fine with wires connected correctly. Leave them like that. Buggering aroundwith the phase cables on a sensored set up is asking to break something.

Something else is wrong.