Removing old electrics and servo question

[daz75]

My XX has a my old speedo and reciever in it and they feel welded in :) what's the best way to get them out without breaking them assume it's double sided tape.

Also will the old servo in it work with newer electrics 2.4ghz and brushless stuff?

[mporter2000]

My advice use a small flat head screwdriver
Gently separate from chassis
Clean up chassis once removed

[Retro RC]

My XX has a my old speedo and reciever in it and they feel welded in :) what's the best way to get them out without breaking them assume it's double sided tape.

Also will the old servo in it work with newer electrics 2.4ghz and brushless stuff?

Your servo should be fine as your esc should be supplying the right voltage to the receiver and then the receiver onto the servo, only thing is it may feel a bit slow compared to some of the newer stuff

[CHEVY]

Old servos were analogue new gear is digital

[Retro RC]

Old servos were analogue new gear is digital

I've run my old analog servos on new digital receivers with no issues

[CHEVY]

Some people have problems with glitches or false centering

[daz75]

Will be leaving the old receiver in for now as don't have a decent 2.4 set yet. Will the speed work ok with and old receiver and servo