Gearing for 13.5t TC6.2

[Roscopeco]

Hi there trying to get my tc6.2 ready for the start of the on road racing at MB models . It's currently a kit standard built roller , I'm wondering what spur and pinion you tc racers would recommend ?

Thanks in advance

[beale]

Boosted or blinkey?
What motor
What Esc
If boosted probably 6-7.5Fdr
If blinky probably a spec Fdr of 5 or if its open 4.5 ish

(Spur/pinion)*Internal ratio= Fdr

Talk to the other drivers and get an idea what's working. Then get some laps in maybe 2-3 minutes at race pace stop and grab your motor, if you can hold on to it your ok if not it won't make 5 mins so reduce boost or increase Fdr.

[beale]

TC6.2 internal ratio is 2:1 I.e
(84spur/26pinion)*2=6.46fdr

[Richard.S]

I run fdr closer to 7 at mb. Normally run 13.5 boosted but might give blinky a go this season. For blinky I'd gear around 5 I think.