Acetone jar/container for SCT wheels

[david85williams]

Hi all,

I'm struggling to find a jar/container large enough to remove SCT tyres. Can anyone point me in the right direction?

Thanks

David

[racingdwarf]

Ive always used these, but a 5ltr for 10th wheels
http://www.ebay.co.uk/itm/10L-Food-Grade-Plastic-Bucket-Lid-Multipurpose-Ideal-For-Wine-making-/270996303319?hash=item3f18a36dd7:g:u3MAAOSw8gVX6vL Y

And they are airtight

[Ross]

I used a sandwich/kitchen container with a rubber seal around it for my 1/8th tyres.

[david85williams]

Thanks guys for the suggestions. Very helpful.

[fidspeed]

I nick my boys gym/protein mix tubs

[mitsirfishi]

I Use a multi layer veg steamer put the hob on no.4 and let the vapor do its thing normally does the trick

[Hog]

25 litre fermentation bucket from Wilko's. Cut a circle of wire mesh slightly smaller than the circumference of the bucket, and make some 2 inch long legs for this to stand on to keep the wheels and tyres out of the acetone.

Room for 1 set of wheels, or 10 - up to you. Just needs a small amount of lab grade acetone (from Ebay) in the bottom, leave the wheels and tyres in the acetone vapour for 72 hours and they all come off with no struggle. Wire brush the old dried superglue off the rims once dry and hey presto.