410

[Backforfun]

Is there a way of telling which version is which and do any parts carry over

[maxoo]

V1: small bore shocks
V3: big bore shocks and classic slipper like v1
V4: like v3 with 2 ways slipper

[Origineelreclamebord]

The DEX410v1 up to v4 and DEX410R are (nearly) fully compatible on parts; major differences are:

- 1.5mm pin CVD (v1) versus 2.0mm pin CVD (DEX410R and the 2010 (v2) upward);
- Small bore (v1, v2, R & Rv3) vs. big bore shocks (v3, v4).
- Some changes to the suspension parts, like hubs that require a different size of bearings (v3/Rv3 onward I believe), but it should be interchangeable.

The v5 is quite a different beast: chassis, hangers & some other parts have changed. Coupled with the introduction past Durango's hayday, parts will probably soon be hard to find, if they are not already.