View Full Version : Klinik RC KC Conversion kit
rcrcman
31-08-2018, 02:54 AM
With stock coming to the EOS this fall, the Klinik conversion kit from the USA is an amazing upgrade. Eliminating 44g of rotating mass as well as improving the internal ratio from 2.1:1 to 2.57:1
rcrcman
31-08-2018, 02:58 AM
Pics
rcrcman
15-09-2018, 12:44 PM
Michal’s car
bertros
21-11-2018, 10:17 PM
Has anyone been running this kit? What's the scoop on med to high grip carpet?
rcrcman
21-11-2018, 11:56 PM
Yes many. You can join the team schumacher USA page on Facebook for loads of info 👍
I run one in stock, it makes a massive difference and the car is silent (with polypro pinion and 69 tooth Associated spur).
chris2005bikes
10-12-2018, 11:30 PM
I ran the kit for the 1st time this weekend. At first I had a load of issues until I made the flats far deeper and made sure the grub screws were thread locked and nipped up tight. Was perfect from then and definitely quieter and more responsive. Before anyone rushes off to buy the kit you only need the idler gear and belts as the diff is the older k1/k2/kf2 diff which is easily available.
peakman
16-12-2018, 09:41 PM
I followed the instructions and havent had one problem and i have been running stock and mod with it.
Step 9: Remove set screws in front pulley and Loctite. Make sure pulley does not rub on transmission housings. Adjust as necessary.
from the instruction sheet
Originalgeezer
19-12-2018, 11:42 AM
I have a MOD Kit, never fitted or used in the UK that I will sell on as I have changed Brands for 2WD
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.