DaveG28
25-02-2009, 02:03 PM
I have a part built brand new Bmax (just haven't built the centre section yet!) with Champ pack, and official Yokomo titanium screw kit on it, and loads of spares, for sale!
Shell and wing uncut and unpainted. Has the alloy steering link/servo saver mount option parts, and option alloy rear hinge in mounts!
Only used part in the kit is the slipper assembly which was used on another car!
Spares include:
All these spares BNIP:
2 x BM-S7 Shock maintnenance kits (shock bottoms and bushings)
1 x pack of HPI 3x25mm screws for shock top mounts
1 x BM-670D Slipper drive cups
1 x BM-670SP Slipper adjusting kit (spring/retaining nut)
1 x BM-670C Slipper pads
1 x BM-SG81 81T spur
1 x BM-670P Slipper plates
3 x BM-302F front transmission cases
1 x BM-302R Rear Transmission case
1 x BM-011 Wheel Hub Pins
1 x BM-009B Inner suspension arm pins
1 x BM-009A Outer suspension arm pins
1 x BM-008F pair Front wishbones
2 x BM-008R pair Rear wishbones
3 x BM-017 Front and rear shock towers
2 x BM-015S Pair steering spindles
1 x BM-415R pair rear hub carriers
1 x BM-413 pair Front Hub carrier
1 x BM-300 front/rear suspension mount
1 x BM-001 wing mounts/bumpers
1 x BM-206 B-Max ball cups
2 x SP7369 axle pin packs
1 x ZC-207HD ball cups
2 x ZC-206 Ball stud packs
1 x BX-41FS Bx front roll bar set (hardware can be used to add front roll bar for B-Max too using B-Max roll bars)
1 x Full set of wheels (plus another BN set as comes with the kit!)
All these spares brand new but not in packets:
1 x Full set of spare B-Max titanium turnbuckles
1 x kit plastic servo saver mount
1 x kit plastic centre link
1 x diff gear
1 x output shaft gear
1 x Rear shock tower
Used spares
1 x Complete differential fully assembled. Needs rebuild (was used in another B-Max)
2 x axle washers
1 x full front spring set (5 pairs)
1 x full rear spring set (5 pairs)
Battery Posts and straps for Lipo conversion
Pics below, will only sell for good price (@£300 posted, @£280 for pickup at meeting, slight negotiation possible) as it's brand new, has loads of option bits, and the spares alone are a fortune's worth!!
Shell and wing uncut and unpainted. Has the alloy steering link/servo saver mount option parts, and option alloy rear hinge in mounts!
Only used part in the kit is the slipper assembly which was used on another car!
Spares include:
All these spares BNIP:
2 x BM-S7 Shock maintnenance kits (shock bottoms and bushings)
1 x pack of HPI 3x25mm screws for shock top mounts
1 x BM-670D Slipper drive cups
1 x BM-670SP Slipper adjusting kit (spring/retaining nut)
1 x BM-670C Slipper pads
1 x BM-SG81 81T spur
1 x BM-670P Slipper plates
3 x BM-302F front transmission cases
1 x BM-302R Rear Transmission case
1 x BM-011 Wheel Hub Pins
1 x BM-009B Inner suspension arm pins
1 x BM-009A Outer suspension arm pins
1 x BM-008F pair Front wishbones
2 x BM-008R pair Rear wishbones
3 x BM-017 Front and rear shock towers
2 x BM-015S Pair steering spindles
1 x BM-415R pair rear hub carriers
1 x BM-413 pair Front Hub carrier
1 x BM-300 front/rear suspension mount
1 x BM-001 wing mounts/bumpers
1 x BM-206 B-Max ball cups
2 x SP7369 axle pin packs
1 x ZC-207HD ball cups
2 x ZC-206 Ball stud packs
1 x BX-41FS Bx front roll bar set (hardware can be used to add front roll bar for B-Max too using B-Max roll bars)
1 x Full set of wheels (plus another BN set as comes with the kit!)
All these spares brand new but not in packets:
1 x Full set of spare B-Max titanium turnbuckles
1 x kit plastic servo saver mount
1 x kit plastic centre link
1 x diff gear
1 x output shaft gear
1 x Rear shock tower
Used spares
1 x Complete differential fully assembled. Needs rebuild (was used in another B-Max)
2 x axle washers
1 x full front spring set (5 pairs)
1 x full rear spring set (5 pairs)
Battery Posts and straps for Lipo conversion
Pics below, will only sell for good price (@£300 posted, @£280 for pickup at meeting, slight negotiation possible) as it's brand new, has loads of option bits, and the spares alone are a fortune's worth!!