Original RC10 Worlds Klein/RPM 91

[xfactor]

Hi all,

Ive been working on a Original RC10 KLEIN.

The chassis, RC10T nose, Motor Plate is powder coated in a purple/blue.

It has the White Klein (Dynotech) front and rear arms. These are a copy of the RPM 91 worlds arms. White RC10T front bulkhead, White RPM front bumper, RPM White ballstud ends, A&L Factory Works 91 rear tower, front tower and light weight rear brace. RPM rear hubs. Plus a lot more.

Its not finished yet, but will put pictures up tomorrow of it so far. If I get in the ICONIC, it will be coming with me......:thumbsup:

[xfactor]

Original RC10 Worlds with Klein arms, build so far.

[Yorkiebar]

That's a thing of beauty. :woot:

[daz75]

Love the colour. Strange looking wishbones those

[Aire valley]

Not another one Mark..!..😂.....love the colour, love the concept, love the detail..! 👏👍.....when you sell this one, as you will..! think of me ..! First refusal please..😉...
Alan...

[xfactor]

Body painted today and almost complete...:thumbsup::thumbsup:

Click to enlarge.......:thumbsup::thumbsup:

[Peakey]

Looking good mate, is that a painted or anodised chassis?

[xfactor]

The Chassis, Nose plate and Motor plate are Powder Coated matey.:thumbsup:

[Aire valley]

That's a great paint job Mark...👏 classic but different..!
Really finishes that beautiful car off perfectly..!

[Nige55]

Beautiful. If you bring it to the Revival, keep an eye on it as I may be found licking it :-)

[DerbyDan]

Lovely build - to the good-old WOIN (What's Old Is New) Recipe.

Loving the Nick Goodall inspired paint job too :cool:

[xfactor]

Cheers Lads for your kind words....:thumbsup:

It will be coming to the ICONIC 2019 and raced. Along with a few others...:thumbsup:

[xfactor]

Ive managed to finish the RC10. All wired and powered up. Now ready to test and give it a run out.

I will post finished pictures later of my ICONIC 2019 runner......:thumbsup:

[xfactor]

Ready for the track....:thumbsup:

CLICK TO ENLARGE..

[Roscopeco]

Looks lovely that matey :thumbsup:

[Aire valley]

Brilliant Mark...👍.....interesting placing of the esc..!
Don't forget me when you move it on..!..😉 😂

[xfactor]

Brilliant Mark...👍.....interesting placing of the esc..!
Don't forget me when you move it on..!..😉 😂

The Fluorescent Green maybe coming up soon............;);)

[Nige55]

Dayumn that looks good. Absolutely gorgeous :wub:wub

[Aire valley]

The Fluorescent Green maybe coming up soon............;);)

👍 🙏......remember me..!

[xfactor]

Hi all,

Just thought I would share some updates to my RC10.

Now complete with,

NIX 91 Front Low Tower.
This allows for the B3 Front Shocks or the B5/B6/B6.1 Front Big Bores.

KASHIMA Fox coated Big Bores with Jconcepts Adjusters.

Full RPM 91 Worlds front end and rear end.

MIP Shiny Driveshafts

I also changed the electrics around to neaten it up a little. Ready to be given its first run tomorrow weather dependant, then on to my next project....

CLICK TO ENLARGE PICTURES...

[Stuntmonk1]

:drool::drool::drool:

[isobarik]

That is one good looking car

mvh iso

[Peakey]

Hi all,

Just thought I would share some updates to my RC10.

Now complete with,

NIX 91 Front Low Tower.
This allows for the B3 Front Shocks or the B5/B6/B6.1 Front Big Bores.

KASHIMA Fox coated Big Bores with Jconcepts Adjusters.

Full RPM 91 Worlds front end and rear end.

MIP Shiny Driveshafts

I also changed the electrics around to neaten it up a little. Ready to be given its first run tomorrow weather dependant, then on to my next project....

CLICK TO ENLARGE PICTURES...
Is this not for sale yet?

[xfactor]

:lol::lol::lol::lol:

No its not for sale.....:thumbsup:

I gave it a run out Saturday at Coventry track. I was surprised how good it was to be honest. Just needs a little weight up front.....:thumbsup:

[Aire valley]

Really does look great Mark...👍..... Having run RC10's for years, I'm not too sure about shorty Lipos to be honest. They seem too light to me.....it seems to handle better with full length lipo...imo..

[nicefrog]

That is a fantastic build, could you list the parts you used for the front and rear hubs. I'm building one also but I'm not sure what parts to use on the hubs. Also I'm a bit lost with shocks.. I'm using a fibre lyte Truck rear tower and worlds replica front tower. I have B44 CVDs.

[xfactor]

That is a fantastic build, could you list the parts you used for the front and rear hubs. I'm building one also but I'm not sure what parts to use on the hubs. Also I'm a bit lost with shocks.. I'm using a fibre lyte Truck rear tower and worlds replica front tower. I have B44 CVDs.

Hi nicefrog, thank you for your comment,

REAR.

Original RPM RC10T hubs
Original RPM Large Bearing Set for 3/16 axles
Jconcepts 12mm Hex

FRONT.

RC10 B4.2 30 degree castor
RC10 B4.2 Front axle
RC10 B4.2 Front steering arm
RC10 B4.2 Front 12mm hex

All very hard to find, but most are on Ebay…… Hope that helps....

[xfactor]

That is a fantastic build, could you list the parts you used for the front and rear hubs. I'm building one also but I'm not sure what parts to use on the hubs. Also I'm a bit lost with shocks.. I'm using a fibre lyte Truck rear tower and worlds replica front tower. I have B44 CVDs.

Shocks,

I do have a set in the for sale that came off a RPM 91 Worlds, but are blue alloy with blue alloy tops.

Front,

Big bore you would need b6 rear body with b6 front shaft. This allows for the intermediate shock you need for the RPM 91 Tower.

Small bore is intermediate for the RPM Tower, but if it has the hole a little lower, its for the .89 B3 front shock.

Rear,

The truck tower is no different in height to the buggy. The truck has a longer shock due to the travel to the wishbone (further out). So the rear buggy shock is no problem on the truck tower on the buggy ( I used to run it)

For BIG BORE, You will need a set of B5/B5M shocks.... Hope that helps...:thumbsup:

[nicefrog]

Thanks Xfactor, This helps me out a lot :). I'll start hunting those B4 parts and have a think about the shocks

[revol]

Just to add that for the front B4.2 axles JConcepts also do a part that's probably easier to find. Also, the AE parts are sometimes listed as SC10 parts, just to further confuse matters!

[millser]

so want another

[nicefrog]

Just to add that for the front B4.2 axles JConcepts also do a part that's probably easier to find. Also, the AE parts are sometimes listed as SC10 parts, just to further confuse matters!


Thanks for the SC10 hint, also I did end up finding a pair of the Associated hex axles here in Australia.. Wasn't easy but they are on the way. The parts I don't have is probably less than the parts I do have now. I need the alloy hex mounts and shocks, some linkages etc.