PDA

View Full Version : Schumacher Bosscat and Shorty Lipos?


Bigdawgracer
20-11-2019, 07:03 AM
Hi All,

I’m looking at getting my first vintage Schumacher, hopefully a Bosscat Works?

I’d like to run my shorty batteries though...

Can shorty batteries be fitted into a Bosscat?
Has anyone done it?

Thanks!

fidspeed
20-11-2019, 07:30 AM
I think you may have to run shorty length ways along chassis like most current 4wd cars
I have done it on my procat I think lipo would foul on belt if tried across chassis like xls re release unless using a thin lipo and raising it off bottom deck slightly

send email I'll send pics
regards Dave

bish
12-12-2019, 12:24 PM
I'm doing the same. Dave's solution is neat, I'm just looking for a shorty on one side and radio gear on the other side. Probably need some 3d printed stuff.

lofty2332
12-12-2019, 01:44 PM
Have a look at Muzzroom racing, I know they do a Cat 2000 lipo holder so you might find they do a bosscat one

ducatikid
06-04-2020, 07:18 AM
I've just done it my Bosscat. I used 2 strips of velcro to run it down the right hand side of the chassis. Works a treat and is fixed well.

Peakey
13-04-2020, 09:45 PM
Mines here be warned it’s got massive photos 😂

http://www.oople.com/forums/showthread.php?t=196717&highlight=Bosscat

Danf1275
13-05-2020, 08:13 PM
Recently designed these for mine

https://www.shapeways.com/product/TBQYS83BC/schumacher-bosscat-shortie-lipo-cradle?optionId=157860292&li=shops