View Full Version : Modded Mardave
B&H Racing
12-03-2009, 10:34 AM
I`ve been doing a little bit of modding on my Mardave.
Not on purpose :blush:
http://s586.photobucket.com/albums/ss303/MystikalV12/?action=view¤t=11032009321.jpg
http://s586.photobucket.com/albums/ss303/MystikalV12/?action=view¤t=11032009322.jpg
http://s586.photobucket.com/albums/ss303/MystikalV12/?action=view¤t=11032009323.jpg
Hope the pics work ????
Here is the album if it does`nt
http://s586.photobucket.com/albums/ss303/MystikalV12/
nope, no pics, was hoping to see some mangled mayhem!!
B&H Racing
12-03-2009, 10:37 AM
Hopefully the link to the album should work !
B&H Racing
12-03-2009, 10:59 AM
Something Hard :thumbsup:
To honest not sure.
It was racing at Maritime Club with a front bumper.
The track markings are Plastic Rainwater Pipe.
Guess it must of been a track securing bolt or something
Affected the handling a tad after :lol:
well, in true Mardave style.... bend it back... or in Schumachers marketing policy... it is the new adaptive chassis flex technology :woot:
Bungleaio
12-03-2009, 11:58 AM
http://i586.photobucket.com/albums/ss303/MystikalV12/11032009321.jpg
http://i586.photobucket.com/albums/ss303/MystikalV12/11032009322.jpg
http://i586.photobucket.com/albums/ss303/MystikalV12/11032009323.jpg
I think you've got a bit of tweak mate!
kek23k
12-03-2009, 01:42 PM
How heavy are them batteries? ;) (j/k)
telboy
12-03-2009, 07:34 PM
Did someone stand on it!:p
Its a quick way of altering the kick up.:lol:
Brett - get the 3mm chassis mate - stops my bangers bending anyway.....
Chris Green
12-03-2009, 11:05 PM
Nice work Brett!
What is the brushless system like in a hotrod?
Northy
12-03-2009, 11:07 PM
Have you lowered it? :lol:
G
B&H Racing
13-03-2009, 12:27 AM
Nice work Brett!
What is the brushless system like in a hotrod?
Brushless system is fun, I`m currently racing against 3200/4900 lipo mardaves and beating most of them with a 4 cell and brushless :thumbsup:
Hog, the car was built to do the Medway National so a 3mm Chassis is not legal.
Good thing about Mardave £6 whole pound for a new chassis.
bodgit
14-03-2009, 04:26 PM
what speedo and motor are you running in that and do you have to power down on the tranny
B&H Racing
14-03-2009, 05:53 PM
Running an EZRUN Motor & Esc
The motor is a 3000kv 13T
To run around the oval I have to turn down most of the settings.
But on the circuit that I mainly race, its a touring car circuit so I can turn everything up :woot:
bodgit
14-03-2009, 05:54 PM
what sort of cost was that set up
was it a combo set
B&H Racing
14-03-2009, 05:56 PM
For the Brushless system approx £45 whole pound from www.rcmart.com (http://www.rcmart.com)
bodgit
14-03-2009, 05:58 PM
cheers mate might give that a go.
B&H Racing
14-03-2009, 06:01 PM
http://www.rcmart.com/catalog/rc-brushless-motor-yeah-racing-ultimate-brainpower-senserless-setcard-p-28345.html?cPath=293_946
Mine is a 25A esc.
So the actual reality is I bought the yeah racing sytems from RCMART and because i`m a tart and I wanted a blue motor to match my chassis I swapped my motor with a blue EZRun motor from a mate.
He bought his EZRun system from Ebay.
Its good fun
bodgit
14-03-2009, 06:15 PM
found this and with the exchange rates it seems ok is this basically same as you,ve got
http://cgi.ebay.co.uk/Ezrun-13T-Brushless-motor-ESC-3in1-RC-car-truck_W0QQitemZ270357781604QQcmdZViewItemQQptZUK_T oysGames_RadioControlled_JN?hash=item270357781604&_trksid=p3286.c0.m14&_trkparms=72%3A1688%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318
B&H Racing
14-03-2009, 06:27 PM
Yup thats it just different stickers, and thats the motor I swapped with my mate because it was blue :blush:
bodgit
14-03-2009, 06:32 PM
rcmart is dinball from ebay but he,s out of stock so will order this one thanks for help
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.