BX Worlds Shocks and B-Max Champ. Shocks

[4times]

Are the shocks in the B-Max Championship pack the exact same as the Worlds MR4BX shocks? Same shock body length, shaft length, etc...??

[Chesty]

I had to replace a bent rear shaft on the B-Max CP the other week.

It was 49.6mm length. There were 3 lengths listed & that was the longest.

I think this is longer than the BX kit rear shaft, but I may be wrong...

[traffman]

The left hand side picture is the Bmax shock , The other is the BX shock.
Both rear and as you can see the shaft from the Bmax shocker is longer .
The rest is just the same apart from some knurling on the BX shocker.
http://i64.photobucket.com/albums/h164/traffman/DSC03359_edited-1.jpg
Hope this helps.

[Jonathan]

The BX worlds & factory editions use the same length as the BMAX, 49.6mm YS-5L-2T.

[4times]

The left hand side picture is the Bmax shock , The other is the BX shock.
Both rear and as you can see the shaft from the Bmax shocker is longer .
The rest is just the same apart from some knurling on the BX shocker.
http://i64.photobucket.com/albums/h164/traffman/DSC03359_edited-1.jpg
Hope this helps.


traffman: Is the BX shock from a regular BX or Worlds Edition buggy? Thanks for taking the time to snap a picture.

[chokoboy]

The left hand side picture is the Bmax shock , The other is the BX shock.
Both rear and as you can see the shaft from the Bmax shocker is longer .
The rest is just the same apart from some knurling on the BX shocker.
http://i64.photobucket.com/albums/h164/traffman/DSC03359_edited-1.jpg
Hope this helps.

For me it looks like the bx shafts are the same length as the silver shock shafts that came with the molded shocks for the b-max.