gramey
13-04-2009, 10:52 PM
:)I have for sale a Tekno V3 - Losi 8T 1.0 Brushless truggy which was built using new top quality components using a brand new Losi 8T RR as a donor vehicle. This has only had minimal use since it was built at the end of last year having only had two outings on our local club track.
Tekno V3 kit - £90.00 plus shipping & customs.
MGM Com Pro 16025-3 switched waterproof esc with Unicard programming card and CC02 connection cable - £200.00.
Genuine Neu 1515-1YF finned 2200Kv brushless motor - £182.00.
Hitec HS5995TG (steering) & 645MG (throttle & brake) servo's - £110.00
King Headz front, rear and steering braces - £45.00.
Spektrum SR3100 2.4Ghz receiver - £45.00.
Complete drive train and suspension from Losi 8T RR - £100.00+ (?).
Total £750.00+
The Tekno V3 kit was chosen as it runs a mechanical brake system the same as a stock nitro truggy, this can be dispensed with and braking via the esc if you prefer. It also uses a clutch system like a normal nitro and again this can be dispensed with and direct drive used with a selection of brand new Tekno long shank Mod.1 pinions included with the sale.
The chassis has some very minor scratching to it from it's two runs outdoors and very slight scratches to the shell. The shell has a slightly mottled effect if you look closely as I backed it with normal white by mistake instead of the white for backing flourescent colours. Other than that this truggy is in excellent condition having had very little use and once set up to your liking is more than a match for a nitro.
It will come with the stock yellow Losi RR wheels and XTT tyres which are brand new . Comes with Tekno instructions, MGM esc intructions etc.
No batteries are included
£400.00 + £20.00 p&p
http://i272.photobucket.com/albums/jj176/gramey58/PICT0030.jpg
http://i272.photobucket.com/albums/jj176/gramey58/PICT0022.jpg
http://i272.photobucket.com/albums/jj176/gramey58/PICT0025.jpg
Tekno V3 kit - £90.00 plus shipping & customs.
MGM Com Pro 16025-3 switched waterproof esc with Unicard programming card and CC02 connection cable - £200.00.
Genuine Neu 1515-1YF finned 2200Kv brushless motor - £182.00.
Hitec HS5995TG (steering) & 645MG (throttle & brake) servo's - £110.00
King Headz front, rear and steering braces - £45.00.
Spektrum SR3100 2.4Ghz receiver - £45.00.
Complete drive train and suspension from Losi 8T RR - £100.00+ (?).
Total £750.00+
The Tekno V3 kit was chosen as it runs a mechanical brake system the same as a stock nitro truggy, this can be dispensed with and braking via the esc if you prefer. It also uses a clutch system like a normal nitro and again this can be dispensed with and direct drive used with a selection of brand new Tekno long shank Mod.1 pinions included with the sale.
The chassis has some very minor scratching to it from it's two runs outdoors and very slight scratches to the shell. The shell has a slightly mottled effect if you look closely as I backed it with normal white by mistake instead of the white for backing flourescent colours. Other than that this truggy is in excellent condition having had very little use and once set up to your liking is more than a match for a nitro.
It will come with the stock yellow Losi RR wheels and XTT tyres which are brand new . Comes with Tekno instructions, MGM esc intructions etc.
No batteries are included
£400.00 + £20.00 p&p
http://i272.photobucket.com/albums/jj176/gramey58/PICT0030.jpg
http://i272.photobucket.com/albums/jj176/gramey58/PICT0022.jpg
http://i272.photobucket.com/albums/jj176/gramey58/PICT0025.jpg