PDA

View Full Version : LRP Sphere Competition TC Brushless ESC SETUP


deepdale11
15-04-2009, 06:23 PM
Call me stupid but how do you set the mode you want on this speedo....i have read the instructions and i know how to go through them but how do you save it ??

Rich D
15-04-2009, 06:38 PM
Each setting is stored automatically as you move onto the next set of parameters

deepdale11
15-04-2009, 06:58 PM
so if i wanted to save it in mode 2 step 3 for example, i have the red light and the blue flashing three times, do i just press the mode button until it stops or can i just turn it off?

Rich D
15-04-2009, 07:21 PM
the lights on the left indicate the mode you are currently in.

the number of flashes of the blue light on the right indicate the current value for that mode.

So for example left hand side lights flashing red/orange alternately = initial brake adjustment mode

Blue light on right hand side flashes three times = setting 3 ( of 6 ) where 0 blue flashes are no initial brake and 6 blue flashes are full initial brake.

I think that makes sense :thumbsup:

deepdale11
15-04-2009, 07:27 PM
yeah that make sense.....so if i wanted to save that setup, what do i do?

Rich D
15-04-2009, 08:33 PM
there are no multiple presets - just cycle back to the beginning using the mode button and you come out of programming mode and your settings are stored ! ?

Im a little confused as to your confusion :woot: :confused:

deepdale11
15-04-2009, 08:51 PM
it doesn't take much to confuse me:woot: so if i keep pressing mode to come out of it...it saves it. so if i press and hold the mode again should that show what i have set it too....because it doesn't it justs shows the first mode?

bigred5765
15-04-2009, 09:12 PM
i would down load the manual of the lrp web site

deepdale11
15-04-2009, 09:20 PM
Thanks but i have the instructions that come with the box....that doesn't seem very clear?

Rich D
15-04-2009, 09:23 PM
it doesn't take much to confuse me:woot: so if i keep pressing mode to come out of it...it saves it.

Yes thats how it should work - press until you get back to normal operation and all your adjustments should be saved. If not then it needs attention.

deepdale11
15-04-2009, 09:38 PM
ok..thanks