Lifepo4 battery for Racing car and receiver

[lucylu]

Some beginning racers start to use LiFePo4 Hard case 6.4V 2500 mah 25C -30C in Janpan
the Feedback for after 3 months :
much more safety for overcharge and overdischarge no blast no fire , It is really good for new racers

we are using Lifepo4 battery for receiver batteries to apply to the gas powered R/C cars

we also start produce hard case lifepo4 for 1/10 1/12 1/18 car
Because lifepo4 Voltage is lower than Lipo, the 1/12th is more slower and easiest to drive, even 1/18th too

we have to use a different case , more little than lipo hard case


http://static.rcgroups.com/forums/images/smilies/biggrin.gif Maybe could be the only one in the global R/C market with lifepo4 battery

[lucylu]

About receiver's batteries and transmitter's batteries using Lifepo4,
the discharge current is higher and the voltage out is lower.
but about receiver, I don't know the voltage amount in out when the battey is full charged, but if the receiver can works with that voltage, we have the solution
because R/C guys don't need to buy the voltage regulator.

if the voltage regulator is needed, we can produce a mini hard-case plastic-box and put it inside the box.

do a plastic box to put inside the voltage regulator and the LiFePo4 battery ...

I shall always be very happy to hear from you , Guys