View Full Version : which nut driver?
sefton
08-02-2007, 09:13 AM
what size nut driver do I need for the ballcups on a b4?
also which hex for the pinion grub screw?
Thanks
Andy Moore
13-02-2007, 01:31 AM
what size nut driver do I need for the ballcups on a b4?
also which hex for the pinion grub screw?
Thanks
If you mean the ballstuds, its a 3/16 nut driver. Im pretty sure that the pinion is a 1/16 driver. Hope it helps!
Oscar
13-02-2007, 10:31 AM
Pinion is almost always 1.5mm.
If you have the American imperial type pinions, they are often 0.050" or can be 1/16th as Andy said previously.
jimmy
13-02-2007, 10:45 AM
Most of my american pinions are 1/16th- I bought a full set when I started racing. (which reminds me, where can I get a bag of grub screws for these? I need at least 10 or so)
I replaced them with good quality RW pinions which are 1.5mm
Oscar
13-02-2007, 07:42 PM
RW do a pack of metric ones with the allen key for about £2, I think they might also do the 4-40 ones also.
Ask Sunday best;)
bigred5765
13-02-2007, 07:46 PM
Most of my american pinions are 1/16th- I bought a full set when I started racing. (which reminds me, where can I get a bag of grub screws for these? I need at least 10 or so)
I replaced them with good quality RW pinions which are 1.5mm
see nick oliver
Andy Moore
14-02-2007, 02:12 AM
1/16th and 1.5mm are almost interchangable as far as the driver. Ive had to use 1.5 in a pinch before, haha.
jimmy-I know a company from the states Robinson Racing sells extra setscrews.
zagonielod
01-05-2010, 06:07 PM
Is the Fastrax Interchangable Hex Driver Set any good? I've heard about some of those, for ex those from Turnigy, which broke pretty easily. Are Fastrax better than that?
(http://www.fxmodells.ro/?q=action/view/id/348/page/94)
I have both metric and imperial sets of the fastrax drivers, I've had them since they first came out and I have not broken a tip yet!:thumbsup:
zagonielod
02-05-2010, 06:57 AM
Thanks jaxx! I'll probably buy one set than. I have to see which modul do I need. I have a Torche Pro and an Ansmann Mad Rat. Do you have any ideea which module are those screws? Metric or imperial?
zagonielod
03-05-2010, 07:04 PM
Bought them today! :lol:
It is sooooo much better with theese in comparison to those small L shape hex drivers loooool :thumbsup:
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.