PDA

View Full Version : SETUP System


carlin
28-04-2009, 07:20 PM
Hi Guys,

Has anyone wondered why no one has brought out setup gauges for 1/10th buggies?

Well i've found someone who does & i'm going to order one.
They said they will fit the CAT SX as well as other cars.

Here is the link if anyone is interested

http://cgi.ebay.co.uk/Setup-Station-for-Losi-XXX-4-XX4-TRF-501X-BUGGY-set-up_W0QQitemZ250391771629QQcmdZViewItemQQptZUK_Toys Games_RadioControlled_JN?hash=item250391771629&_trksid=p3286.c0.m14&_trkparms=72%3A1688%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318

or search for setup station on ebay.

Has anyone already used one?

ice-nine
28-04-2009, 07:22 PM
Yeah, I was looking at that too, looks good! :thumbsup:

trekkerkk
29-04-2009, 07:11 AM
ive had one off those:thumbdown:
really wouldnt bother
i found it not so good,
if your going to get one get an alli one,
just my thoughts,

trekkker

carlin
29-04-2009, 08:10 AM
What's wrong with it them?

Who does alloy one

Southwell
29-04-2009, 08:20 AM
Angle setups arn't anywhere near as important than in Touring car. The only car i would buy one for is a Predator as the rear has adjustable toe-in, although i user to just take off the wing and use a camber guage :lol:

Chrislong
29-04-2009, 08:41 AM
I bought one for my X-5, and have adapted it to fit the SX. Its the clear plastic one I use, and I use it approx once per month just to double check the setups.

It is overkill for off-road, set-up by eye I find just as accurate. I can prove this by putting the gauges on then thinking "Why have I wasted 10 minutes doing this, as they're all bang on already".

Bungleaio
29-04-2009, 08:59 AM
I've used one and I'm tempted to get one purely for setting the toe in. The only problem I found was that the markings are quite difficult to see.

jlong
03-05-2009, 04:01 AM
Im interested, what's wrong with it?
The only alu one I know of is the hudy one for 1/10 touring cars, and it's about quadruple the price of that plastic one.
I borrowed one of the hudy set up kits from a touring car guy, and put the Cat SX on it. It seems to fit, but I'm not sure about the accuracy of the measurements because it's designed around the ride height of a touring car, not an offroad car. Maybe that doesn't matter though?