PDA

View Full Version : KO Esprit III settings for ESC


Chesty
16-05-2009, 07:06 AM
I'm running a KO Esprit III (spektrum & FM) with a standard (non 2.4GHz) Novak GTB.

How should the throttle settings be set on the TX?

In the GTB instructions it says set EPAs to maximum (150 on the KO) whereas in the KO manual it says start at factory preset of 100:confused:

I've currently got Throttle High Point & Throttle Brake set to 150 on the TX & no other throttle settings adjusted. Is this a correct starting point?

Also, what response mode is recommended for the standard GTB, or doesn't it matter?

Cheers

Cockerill
16-05-2009, 08:37 AM
I always turn my EPA's to max. on the transmitter before setting up a speedo. However I don't think it really matter's, so long as you leave them at what you set the speedo with, it should still get full throttle/brake.

I think KO's reccommendation of 100 will be for gas cars and setting up throtttle/brake servo's.

bigred5765
16-05-2009, 12:10 PM
agreed with tom, set them to 150 and set your speedo up as per its instructions,

Chesty
16-05-2009, 10:48 PM
Cheers Guys:thumbsup: