PDA

View Full Version : worlds bx lipo cradle

melanie
21-05-2009, 06:53 PM
hi can u pls help me i need to fit a lipo in my worlds bx can u send me some pics or where can i get a cradle:thumbsup:
hardrider
22-05-2009, 02:08 AM
You can get them here (http://www.diggitydesigns.com/D3_Yokomo_MR4BX_SaddleBraces.html) :thumbsup:
hardrider
09-06-2009, 02:22 AM
I own a MR4BXF and would like to get a lipo cradle for it.
I know that Diggity Designs makes a nice one here (http://www.diggitydesigns.com/D3_OffRoad_Products_Yokomo.html).
Can someone advise me as to which one to order. The one for the BX or BXW?
I have emailed them but failed to get an answer :(
Jonathan
09-06-2009, 07:26 AM
If its a BXF, then it has the same 2 piece chasis as the regular BX and thats the one you need to order.

They realy need a uk distributor for these though as the postage is 3/4 the cost of the cradle !
hardrider
10-06-2009, 01:07 AM
If its a BXF, then it has the same 2 piece chasis as the regular BX and thats the one you need to order.

They realy need a uk distributor for these though as the postage is 3/4 the cost of the cradle !

Postage and "handling" can always make a nice deal seem expensive.
Fortunately for me is that I need a few other items from them so the postage charges can be spread out a little bit.
Micha_MX4
24-09-2009, 04:39 PM
any updates on that topic?

now, as there are many 4xxx mAh Lipo saddle packs out that
would fit in my BXF (23mm height should fit) I'm looking for
a "frame" to fix them in the car.

any distributers in Europe?

thx,
Micha
U.S.CAT3K
29-09-2009, 08:04 PM
The Diggity parts are quality pieces, the only downside being that you can't use the chassis-mounted belt tensioner (on the non-Worlds car anyway).
hardrider
30-09-2009, 03:05 PM
Great news for non-Worlds owners.
I managed to install the Diggity tray without removing the belt tensioner.
I pulled the Dremel on the tray!!!
Shaved off just a wee bit of material and it fit like a glove.
Micha_MX4
03-10-2009, 06:19 PM
good info, will do that too! now my Intellect lipos need to come...
(and my oneway outdrive that I lost)
hardrider
04-10-2009, 03:18 AM
Micha,

Hope you ordered the IP4200s...
The 6000s will have problems with clearing the upperdeck.
So will the battery post... especially the left one!
Micha_MX4
04-10-2009, 07:24 PM
yep, IP4200. And I have to connect them like Jonathan did...