dibble34
28-06-2009, 08:25 PM
For sale is the last of my ZX5 equipment. I would like to sell the car and spares in one go.
This includes
A kit ZX5 with the upgraded metal front brace and upgraded carbon front shock tower. The rear diff was recently rebuilt with atomic carbon diff and thrust balls. It runs a centre one way and the front diff was recently taken apart and re-greased so should be ok too.
It also has the upgraded front CV style driveshaft’s
The spares include...
BNIP Rear front metal brace that I never got round to fitting, 2 x BNIP rear hub sets.
Quite a few loose spares including several front hubs and carriers (mainly 7 degrees), shock tower gearbox mounts and front gearbox cases.
2 sets of wheels as seen in pictures
2 shells, both with holes cut out for air flow.
It has a cheap acoms servo in it which is included
The car itself has been used outside for the last year by me and is in used condition. I purchased it second hand from someone at my club. There are some scratches to the underside and the car is a little dirty/dusty in places. There are some superglue scabs on the chassis where the esc was mounted and the shells have paint missing in places. The rear spoiler is cracked in places and also has paint missing, but seems to do the job still.
Put some electrics in it and I would say you have a pretty good start up set. Just don't expect a shelf queen as explained above.
I recently purchased a D4 and kept this as my backup just in case, but I never use it now. I ran it today for 5 mins to make sure all was well and it was fine.
If you want any higher res photo’s emailed just drop me a pm with your address.
Not entirely sure what it is worth, I am going to say £70 posted first class recorded delivery.
This includes
A kit ZX5 with the upgraded metal front brace and upgraded carbon front shock tower. The rear diff was recently rebuilt with atomic carbon diff and thrust balls. It runs a centre one way and the front diff was recently taken apart and re-greased so should be ok too.
It also has the upgraded front CV style driveshaft’s
The spares include...
BNIP Rear front metal brace that I never got round to fitting, 2 x BNIP rear hub sets.
Quite a few loose spares including several front hubs and carriers (mainly 7 degrees), shock tower gearbox mounts and front gearbox cases.
2 sets of wheels as seen in pictures
2 shells, both with holes cut out for air flow.
It has a cheap acoms servo in it which is included
The car itself has been used outside for the last year by me and is in used condition. I purchased it second hand from someone at my club. There are some scratches to the underside and the car is a little dirty/dusty in places. There are some superglue scabs on the chassis where the esc was mounted and the shells have paint missing in places. The rear spoiler is cracked in places and also has paint missing, but seems to do the job still.
Put some electrics in it and I would say you have a pretty good start up set. Just don't expect a shelf queen as explained above.
I recently purchased a D4 and kept this as my backup just in case, but I never use it now. I ran it today for 5 mins to make sure all was well and it was fine.
If you want any higher res photo’s emailed just drop me a pm with your address.
Not entirely sure what it is worth, I am going to say £70 posted first class recorded delivery.