H7 PBS / H8.5 Pro / Hitec CRX 2.4 Ghz / H7 Chassis

[alien.46.uk]

Hyper 7 PBS


Good condition Hyper 7 PBS with plenty of upgrades and spares including:

On the buggy Includes:

PCR Laydown Servo conversion
Carbon Rear Shock tower
Carbon front upper plate
CNC Pro Ackermann
CNC Pro Upper Hinge Plate
Ally Chassis Brace
Ally Wing Mount
CNC Front Suspension Tower
Spider Centre Diff
New H8.5 Pro Special Brake Pads
New H8.5 Pro CNC Brake Discs
New Front White Springs
Star Pin Fronts
Star Pin EVO Rears
New Engine Mounts and Spacer
H8.5 Pro Wing
Red Shock Covers



Intellect 1400 Rx Pack (Hump)
Nosram VTEC 1400 Rx Pack (Hump)



Ansmann Racing W3 Tx and Rx set
Futaba S3003 Servos (St and Th)



Hyper 7 Pro Shoulder Bag

This is a very good buggy and fabulously solid. Will take a severe bashing with no effect and can still be competitive at club level maybe further, I don’t know. Never been that far =P …

The upgrades help bring it higher up the ranks and make it a very good looking buggy to boot.

It is in very good condition; however there is a small amount of grinding work done to the flywheel hole to allow the starter wheel to reach an 8.5 Pro flywheel.

It will also come with:

New Hyper Tuned Muffler
Integy Ally Hyper Air Filter
Original Flywheel



NIP Lower Front Arms
Upper Front Arms and Balls
Selection of Hubs Front and Rear
Hyper 8 Pro Shell (crack to rear mounting hole)
Original Shell (several cracks, but repaired and solid)
Blue Front Springs
Black Rear Springs
Original Brake Set-up
H8.5 Pro Centre Diff Mounts
Carbon H8.5 Pro Centre Diff Cover (Will be fitted with new S/S bolts)
New Engine Mounts Screws should you loose any
Various other bits and bobs

Overall this is a very good package with plenty of upgrades and many spares to boot. This is a real bargain and just requires Engine to get here going.

The Diffs have all been rebuilt with fresh Oil and Seals (3k-5k-1k) and the shocks have fresh 35wt oil in them.

Price: £150 Posted

http://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0247.jpg
http://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0248.jpg
http://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0249.jpg
http://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0250.jpg
http://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0251.jpg
http://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0252.jpg
http://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0253.jpg
http://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0254.jpg
http://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0255.jpg

[alien.46.uk]

Hyper 8.5 Pro

Extremely good condition, only had 30 mins use by previous owner and only an hour at the max from me. Selling on again as I think I now want to upgrade my PC and with my new job being on Friday, Saturday and Sunday Nightshift, I just don’t have the time to get down and race on a Sunday and the week is used up sorting general lifey things out.

I’m quite sad to have to sell this one (and the H7 PBS) as well as I’ve only just got back into RC and put a lot of effort into both of the buggies I have and really wanted to get involved in Racing, but without the time to, they seem a little pointless. Hopefully when I can sort a usual 9-5 job, I can look into it again, watch me get one a week after I leave now!

First are the Standard Features of this buggy:

·6-Gear Spider Diffs
·FR2 Extended Main Chassis
·FR2 Extended Chassis & Engine Brace
·CNC Aluminium 43mm Engine Mounts
·CNC Aluminium Arm Holders Front & Rear
·CNC Aluminium Servo Arm
·CNC Aluminium Lightweight Wheel Hubs
·CNC Aluminium Dust Proof Wheel Nuts
·CNC Hard Aluminum Big Bore Shocks
·CNC Aluminium Clutch Shoes
·CNC Aluminium Lightweight Flywheel
·Machined Lightweight Clutchbell
·Titanium Turnbuckles
·Airfilter Support
·All 5 Available Anti-Roll Bars
·Dished Racing Wheels
·Angle Spike Tyres
Included with this buggy is:


Picco P3-B .21 Buggy Engine (Extremely good condition, plenty of compression, few marks and will hold itself on the flywheel nicely).
Jammin JP-2 Pipe (Only used on this buggy, so less than an hours use)
BNIP Crowd Pleazer 2.0 for H8.5 Shell
Ansmann Racing Hi Downforce Rear Wing
1000,3000 and 5000 Wt Diff Oils
Core RC 1400Mah Rx Pack (Hump)
Specktrum Z590 Servo on the Throttle and Brake
Bluebird 630MG Super Torque Servo (Few Months old)
Acoms Technisport 2.4Ghz Tx and Rx Set-up (Batteries too!)
Brand New White Shock Springs
Brand New Red Spring Covers
Brand New Yellow H8.5 Pro Wing (Fitted)
New Filter Outer and 1 BNIP
New HN Muffler Rubber Gaskets
2 Big Wrenches (1 4-Way, 1 5-Way)
1 Small ‘T’ Wrench
Fastrax Glow Ignitor and Charger
Ansmann Racing Clutch Tool
BNIP M-Troniks Micro Failsafe
Fuel bottle
H8.5 Pro Shell Painted Red
All Origional Manuals, Leaflets, Parts Lists and other literature
Acoms Technisport 2.4Ghz Manual
BNIP HN Red Shock Springs (Work extremely well with the 8.5 Pro)
Tube of 8 Clutch Bell Bearings

It also comes with 3 sets of Wheels and Tyres:


HoBao Angle Spikes on H8.5 Pro Dish Wheels
Medial Pro Vega on 15-Spike Wheels
Pro-line Crim Fighters on HN Dish wheels

It has 3 boxes of spares including:


2 Sets of low arms
Hubs, Front and Rear
Front or Rear Diff Housing
All the optional Extras included with original H8.5 Pro
Many other spares and bolts, screws and nuts

Will also Include:


SMD High torque Starter Box (Blue one)
2 x 4000 Mah 7.2v Stick Packs for Starter Box
Ansmann Racing Starter Box Bag
Wiring Loom to allow SMD to run off Car/Bike/Leisure Battery

As you can see again, there is a lot of kit included with this set as well and overall over the past few weeks has cost me far more than I’m going to ask for it all.

Will also come in its original Box.

If collected I will also throw in a BNIP bottle of Byron Gen2 25% fuel (1/2 Gallon Tub), oh and I nice cleaning brush.

Price: £260 Posted

http://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0256.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0257.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0258.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0259.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0260.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0261.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0262.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0263.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0264.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0265.jpg

[alien.46.uk]

http://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0267.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0268.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0269.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0270.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0271.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0272.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0273.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0274.jpg

[alien.46.uk]

Hitec Aggressor CRX & Specktrum 2.4Ghz Module

Just bought this and the 2.4Ghz module, but as all the above is going, there’s no point keeping it.

It’s a Hitec CRX Agressor with a 2.4GHz Module, features of the CRX to follow:

·High definition/multi-pixel LCD Display
·Dual Rate steering
·Brake ATL switchBrake lever travel limiter
·Steering wheel tension adjustment
·Trim center audible verification
·Third channel Shifting button
·Transmitter Low Battery Alarm
·Third channel Linear digital trim
·Interchangeable assorted color rubber grip pads in two sizes
·Digital Trims
·RF Indicator light
·Two-speed menu scrolling
·Model Naming. (6 Characters)
·Model select. (20 models)
·Sub-Trims
·Ch #3 Switch Set. (Shift, Linear)
·EPA. (End Point adjustment)
·Steering and Throttle Exponential travel
·ABS. (Anti-Lock braking)
·Steering to Aux/Throttle to Aux Mixing
·Timer(Up/Down)
·Servo Reversing
·Model Copy
·Model Reset. (Factory default)
·RF Indicator light
·Total Transmitter On Time Timer
It has however had its front plastics changed as it looks to have been damaged by previous owner. The new plastics were taken from an SRX, so has the original CRX back and battery cover, but the SRX front. They are the same, just a different shade of grey and has SRX written on it. Function is still 100%.

The Specktrum module is fairly self explaining. Works a treat. Has a bit of plastic missing from the Ariel turning point, where the Arial moves from 270 degrees to 360 Degrees upwards. Arial is still full in tact and again function is 100%.

Also comes with the SRX internals which work fine. Also has the SRX back and battery tray, but has the damaged CRX front panel. Only damage is just behind where the steer wheel is.

As said, it has got a mismatch of plastics, but function is 100% and is a very capable RC unit.

You’ll need a Specktrum RX (Sold this elsewhere).

Also comes with:


2x Rechargeable Battery Packs
1x AA Battery Holder

Price: £70 Posted (Yes, includes Module)


http://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0275.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0276.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0277.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0278.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0279.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0281.jpghttp://i14.photobucket.com/albums/a317/taazzukcb/RC%20For%20Sale%202/smaller/DSC_0282.jpg

[alien.46.uk]

Hyper 7 Chassis and side Guards

Brand spanking new Hyper 7 chassis intended for the PBS but never fitted. Comes with the Hyper 7 Pro side guards, which are also brand new.

Price: £15 Posted

**Or £10 with the H7 PBS**

[alien.46.uk]

All Prices are inclusive of shipping, but only insured up to £50, its £2.50 extra per £100 extra to insure.

Shipping is by 48 Hour courier and will be sent within 2-3 Days hopefully. All be well packed and all attempts made to keep items secure and safe.

I have a good 100% re****tion on Ebay (450+ Feedback) so try to keep people happy elsewhere as well. I try to be as honest as I can and am Happy to take extra pictures on request.

I understand how used kit no matter how little use it’s all had can depreciate, but hope you feel my requested prices are fair. Please let me know otherwise.

Offers Considered, so please feel free to send some offers in if you feel the prices are a little OTT.

Will consider splitting the buggies, but would need some bits confirmed to be bought before this goes ahead. I can add split prices if enough requests.

[alien.46.uk]

Bump - Offers considered.

[alien.46.uk]

Up we go.