PDA

View Full Version : XX 4 Gearing


chris68nufc
12-03-2007, 07:47 PM
This has probably been asked loads of times so i appologise. What is the ideal gearing for York indoors with a Checkpoint 12 x 2 with a kit spur. 84 i think. Thanks. Chris

barnyard
12-03-2007, 11:30 PM
i'd start with a 22 depending on driving style batts etc you might need to go up / down 1 tooth

bigred5765
13-03-2007, 12:02 AM
depends on cells and track but 20-22 seems ok

chris68nufc
13-03-2007, 06:31 PM
I have got a 19 on at the moment. Though it didnt seem very quick. Using IB 4200 with a LRP Quantum 2 speedo.Thanks.

barnyard
13-03-2007, 06:44 PM
thats what i'd gear my 10 on so it was a tad under geared might have been ok for a really tight and small track.

losixxx
13-03-2007, 07:13 PM
spec motor on about a 26 to 28

chris68nufc
13-03-2007, 07:21 PM
Does anybody go off final drive ratios for the Losi or do they do it by feel of the car. I have seen myself get to my last qualifier with the XX 4 and still im not sure of the ratio and feel of the car. What final drive ratio would you recommend? With a 22 pinion and 84 spur you get a final drive ratio of 8.78. Is this classed as ok?

Any help with this would be great as i seem to struggle to get my motors up to full speed.Cheers. Chris.

Swiss
15-03-2007, 11:12 AM
Chris

Overall gearbox ratio of a xx4 is 2.3, I always geared mine on 18/19 pinion with a 78 spur which ranges from 9.4 -9.7, (approx) that was on a Spashett 9*2... Never changed the motor, all threw last years nationals and the only trouble I had with thermal cut out was at the Euro's....