View Full Version : mardave grip roll
bald eagle
26-07-2009, 08:31 PM
Got a problem with my v12 having grip roll, the problem seems the same even with different tyres. Any suggestions?
andyr
26-07-2009, 08:36 PM
have you trued the tyres and rounded the edges
westie
26-07-2009, 08:53 PM
Try smaller dia tyres, around 47-48mm dia on the front and around 52mm on the back, also try running super glue on the outer edge of the front tyres with makes the side walls harder thus less steering, also maybe turn the amount of lock down on your transmitter.
luke ;)
ScottyDogWoof
26-07-2009, 09:19 PM
ernie what you using as front sus. springs or fuel tube??
colin563
26-07-2009, 09:40 PM
check your kingpins & stub axles
ive had a similar proble turned out ot be a slightly bent stub axle
hope this helps
colin
bald eagle
26-07-2009, 10:04 PM
ernie what you using as front sus. springs or fuel tube??
Been using my own little set up for front suspension for months and months, all working very well till last couple of weeks, the grip level at the club seems amazing all of a sudden. the car, as far as i can see, is mint.. nothing bent. But will double check, and i will also check the tyres out.. thanks for everyones replys...;)
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.