DB-01 wheels

[T4miy4 Guy]

Wheres a good place to get the a full set of wheels for my DB-01?

I find it hard to believe there £6 or there abouts for a pair,just for wheels!

Could someone help regards what other wheels fit / would work!

10mm hex front / pin rear

Links please:thumbsup:

Andy

[T4miy4 Guy]

come on lad`s

:p

[VinceVegaUK]

come on lad`s

:p

Hay,

I use Vellrip or Tony Tamiya Parts for most of my stuff if you buy a couple they work out about £5 a pair which is not bad

http://www.vellrip.com/store/productlisting.asp?clr=true&lvl=3&c=47

http://stores.shop.ebay.co.uk/Tonys-Tamiya-Parts__W0QQ_sidZ99799178?_nkw=51320&submit=Search

Later

VV

[trf14]

Hay, try these shop, they are reliable and ship fast to EU
http://shopping.rcmodel.hk/
http://rc-mushroom.com/index.php?cPath=123
http://www.stellamodels.net/catalog/

Wheels are 4.8$.. combine stuff to make it cheaper

Cheers

[T4miy4 Guy]

Thanks sorted:thumbsup:

[fabolousRC]

Thanks sorted:thumbsup:

Also, if the Tamiya wheels aren't available (and you're not running TCS series), you can use any of the following: B44 Wheels, Losi Wheels, and Jconcepts wheels for B44s. Jconcept is kinda iffy though. I have no problem fitting them in but there are people coming out with clearance issues while using Jconcepts wheels on DB01.

Cheers :thumbsup:

[T4miy4 Guy]

Also, if the Tamiya wheels aren't available (and you're not running TCS series), you can use any of the following: B44 Wheels, Losi Wheels, and Jconcepts wheels for B44s. Jconcept is kinda iffy though. I have no problem fitting them in but there are people coming out with clearance issues while using Jconcepts wheels on DB01.

Cheers :thumbsup:


It was the front wheels with the 10mm hex i was struggling on tbh, but it`s all good now but thanks for the info!:thumbsup:

Andy

[Crazy L]

I use the Jconcepts wheels,use a couple of washers behind the pin, just to give some hub clearance. No binding at all after that. :thumbsup: