druid
08-10-2009, 06:59 PM
SOLD SOLD SOLD
X Factory x6 Squared
This buggy was converted about 8 months ago and has been used for a handful of astro turf meetings.
The chassis is wear free and has little or no scratches.
The buggy has:
E speed hangers front and rear
Brand new c hubs
New front wishbones
Alloy motor plate holder.
One run old Schumacher mini spikes all round.
Brand new front alloy bulkhead
New tie rods
1 run old extended rear drive shafts (to allow more droop).
Fully rebuilt shocks all round (rebuild tools included).
Pictures here http://s606.photobucket.com/albums/tt147/druid1001/X6%20squared/
The buggy has no slop at all as I have recently rebuilt it (has done 1 5 minute run at Silverstone since). The buggy is setup as ellis staffords standard setup and has 100 grams of lead placed behind the steering servo. You can add another 50 grams under the speedo slot if you require it.
I have 3 boxes of spare parts that will come with this including:
Full spring kit including chart
Masses of spare screws, washers, shims etc.
3 spare sets of diff balls
3 sets of new c hubs
3 new wishbones
Front shock tower
DMS carbon anti squat kit
Rear toe plates 3 and 4 degrees
Spare slipper clutch setup and 79 and 84 tooth spur gears
Front graphite bulkhead
Lots of tie rod ends
5 turnbuckles
Anti role bar kit
Spare rear wing
New in packet Schumacher mini pin yellow rears
Ballistic buggy fronts and rears on AE rims (fairly well used front in better nick than rears)
4 mini pin fronts on AE rims (Again used).
A pair of proline ribs?
A pair of used rear inserts.
(see pics).
Comes with original box and instruction manual
I have personally put more than £450 into this buggy and I am after £220 including all the spares.
Postage will be around 10-15 quid. I live in Milton Keynes and would happily meet up if fairly local or would be happy for you to collect.
Thanks Drew
X Factory x6 Squared
This buggy was converted about 8 months ago and has been used for a handful of astro turf meetings.
The chassis is wear free and has little or no scratches.
The buggy has:
E speed hangers front and rear
Brand new c hubs
New front wishbones
Alloy motor plate holder.
One run old Schumacher mini spikes all round.
Brand new front alloy bulkhead
New tie rods
1 run old extended rear drive shafts (to allow more droop).
Fully rebuilt shocks all round (rebuild tools included).
Pictures here http://s606.photobucket.com/albums/tt147/druid1001/X6%20squared/
The buggy has no slop at all as I have recently rebuilt it (has done 1 5 minute run at Silverstone since). The buggy is setup as ellis staffords standard setup and has 100 grams of lead placed behind the steering servo. You can add another 50 grams under the speedo slot if you require it.
I have 3 boxes of spare parts that will come with this including:
Full spring kit including chart
Masses of spare screws, washers, shims etc.
3 spare sets of diff balls
3 sets of new c hubs
3 new wishbones
Front shock tower
DMS carbon anti squat kit
Rear toe plates 3 and 4 degrees
Spare slipper clutch setup and 79 and 84 tooth spur gears
Front graphite bulkhead
Lots of tie rod ends
5 turnbuckles
Anti role bar kit
Spare rear wing
New in packet Schumacher mini pin yellow rears
Ballistic buggy fronts and rears on AE rims (fairly well used front in better nick than rears)
4 mini pin fronts on AE rims (Again used).
A pair of proline ribs?
A pair of used rear inserts.
(see pics).
Comes with original box and instruction manual
I have personally put more than £450 into this buggy and I am after £220 including all the spares.
Postage will be around 10-15 quid. I live in Milton Keynes and would happily meet up if fairly local or would be happy for you to collect.
Thanks Drew