PDA

View Full Version : i need a set-up for a B44


chewy
08-10-2009, 07:36 PM
hi everyone,

i am going to be racing at worksop and i would like a set-up that i could use.

thanks

alex

ben
09-10-2009, 01:18 PM
Cant remember everything cos i havent got my car to hand.. what ill be starting with is:

Front Shocks: 40wt #2 piston 1 plastic droop limiter, silver spring
Inside hole on tower, outside on the wishbone, wishbones level for the ride height.

Rear Shocks: 30wt, #1 piston, 1 plastic droop limiter, green spring
Inside on the tower, inside on the wishbone. Driveshafts level

Black rear roll bar, medium wheelbase. Thats all i can remember :blush:

Ben

Big G
09-10-2009, 02:36 PM
I tend to ignore everyone else's setups and just make my own.

learn what each adjustment should do to the car and try it out yourself. you may find a setting that 1 person swears by makes the car harder to drive for yourself. On my SC10 my tyres are well past their best (bald in the middles) so just set the camber to some insane level like 10/15 degrees all round and it actually worked quite well lol

and since a track is rarely exactly the same as before it's difficult to list a certain setup which will work nicely this time.

Go for it and try things out. get as much track time as you can. :)

Lee Martin
09-10-2009, 02:56 PM
Set ups that peopel give as advise should be taken in to give you a starting point - then change to your required taste.

Bens setup will be a good start point.

chewy
10-10-2009, 07:51 AM
hi,

thank you for your help

alex