6000kv 5.5 turn motor and 4600kv

[stampede vxlboy]

hi need help gearing my madrat its got a 78spur gear and i wanted to use the 6000kv 5.5turn motor or my 4600kv just need to now what size pinion gear to use for both motors as the madrat weights alot with the alloy shock tower s and front bumper 1800grams with a battery . any help would be good :D

[Col]

i this the second thread asking the same question?
I've answered in the other thread.

I've reported this thread to get it deleted.

[stampede vxlboy]

pinion gears size would be better i am using a 78spur gear and i need the right pinion gear with the 5.5turn would be a big help for the 5.5turn motor and the 4600kv motor

[jhammond]

Stampede...

Either brush up on your mathematics and work out a sensible ratio yourself, or use trial and error.

I'm sure we're all pretty sick of reading thread after thread of you requesting different ratios for your endless truck, motor and gearing combinations.


Julius.

[stampede vxlboy]

its for a madrat and keep your comment to yourself mate. i need to know if i can use a 78spur gear with a 5.5turn or do i need a bigger spur gear and smaller pinion gear ???????

[James]

Try a ratio of about 9.5-10

[raine]

why do u use alloy shock towers ? just dremel some carbon ones , if u cant buy them.

[Col]

cos carbon is not bling enough

[Paulmay79]

They are cnc lazer cut titanium not alloy i know i sold him them.

[ghost2212]

Just try any combination out. If you smell burning then stop and gear it differently

:thumbsup::thumbsup:

[stampede vxlboy]

what size spur gear would i need a 78/81/82/84/86/90 to run a 5.5 turn

[Battle_axe]

what size spur gear would i need a 78/81/82/84/86/90 to run a 5.5 turn

run a 81 spurr and a 18\19 pinion

[bigred5765]

what size spur gear would i need a 78=18or19/81=20/82=21/84=24/86=25/90=25or 26 to run a 5.5 turn
try that just for bashing not for racing

[stampede vxlboy]

sorry guys i should of said it a madrat with a rb5 diff spur gear slipper pads . anybody could tell me what size spur gear i should use with a 5.5turn motor spur gear sizer are 78/81/82/86/90

[James]

Try a ratio of about 9.5-10

Just work out the closest ratio to this range and itl be fine......

[stampede vxlboy]

were will i find that out ?

[Battle_axe]

sorry guys i should of said it a madrat with a rb5 diff spur gear slipper pads . anybody could tell me what size spur gear i should use with a 5.5turn motor spur gear sizer are 78/81/82/86/90

this totaly depends on your pinion i would go with the 81T spur and a 19T pinion

[James]

were will i find that out ?

Its the gearing ratio:

SPUR / (divided by) PINION X (multiplied by) INTERNAL RATIO (you'll have to find this out, it will be in the insructions, should be 2.5 ish)

[Battle_axe]

Its the gearing ratio:

SPUR / (divided by) PINION X (multiplied by) INTERNAL RATIO (you'll have to find this out, it will be in the insructions, should be 2.5 ish)


the I.R is the same as the B4

[stampede vxlboy]

i will have to buy some spur gear as its a rb5 spur gear and slipper i will order 2 81spur gear and and 84spurgear

[jim76]

just keep your spur gear and work out the correct pinion. changing the spur by 2 teeth isn't going to make a huge difference for bashing. You are better to have a range of 4-5 pinions than a few different spur gears

Just do as James says, and find the pinion that will give you a ratio between 9.5 and 10, and then stick with it.

[stampede vxlboy]

its a rb576spur gear the pinion will have to be about 15pinion i got told but not sure on the spur. i will try it with pinion gears first and the spur . its the same ration as the b4 and that a 81spur gear and 20 pinion gear . can i use the slipper plate of the madrat with a b4spur gear and slipper pads
thanks jimmy

[stampede vxlboy]

thanks jimmy i will try it but i need to get a new spur gear as it worn