Log in

View Full Version : round two this wekend


blitzboy
10-11-2009, 11:05 PM
come guys round two this weekend ya ll ,, get booked in guys ,, ideal meeting to shake down your rides for the players and loads of fun too don t be square be there guys ,,, see ya all there :thumbsup::thumbsup::thumbsup::thumbsup::thumbsup: :thumbsup:

Robbiejuk
11-11-2009, 01:10 PM
Certainly is, Numbers look good for this round but hopefully we will have more turn up on the day. :thumbsup:

Just need to sort a decent track out now :lol:

reg
11-11-2009, 09:02 PM
might not be able to make this one..........the boss is being a t**t and said i cant have it off............i will see what i can do:thumbsup:

dbizzle5
11-11-2009, 09:10 PM
Im there! Looking forward to it again.:thumbsup:

paulsmith
12-11-2009, 08:22 AM
I will be there to defend my WBMCC breakdance championship!

Captain-Codpiece-The-2nd
12-11-2009, 09:14 AM
We should have a lunchbreak marshal dance-off. I hear Reg has a wicked robot.....
________
MORTGAGE LIFE INSURANCE FORUM (http://www.insurance-forums.org/mortgage-life-insurance/)

Dave Dodd
12-11-2009, 09:34 AM
what time did the last round finish ?

might be able to make it to watch the end :lol:

blitzboy
12-11-2009, 10:14 AM
think we finished about 3.30 last time dude ,, sse ya there

Robbiejuk
12-11-2009, 12:49 PM
might not be able to make this one..........the boss is being a t**t and said i cant have it off............i will see what i can do:thumbsup:

Use swine flu or foot and mouth as a cover story? Or you could tell him you have superglued yourself to the bed and can't make it in without dismantling the frame first, and unfortunately your toolbox is in the garage.

reg
12-11-2009, 04:36 PM
We should have a lunchbreak marshal dance-off. I hear Reg has a wicked robot.....
pat you missed that one...................I hear Reg has a wicked bot

reg
12-11-2009, 04:39 PM
Use swine flu or foot and mouth as a cover story? Or you could tell him you have superglued yourself to the bed and can't make it in without dismantling the frame first, and unfortunately your toolbox is in the garage.
pmsl............i will be coming now if my gay loving friend doesnt mind brining me while im in my leather hot pant and fishnets as lloys has asked:wub

Captain-Codpiece-The-2nd
12-11-2009, 04:46 PM
Reg you got so excited whilst typing the word "fishnets" that you actually spelt my name wrong afterwards.......ha ha ha ha and yes, I did ask you to wear that.
________
DIGESTIVE DISORDERS FORUMS (http://www.health-forums.org/digestive-disorders/)

reg
12-11-2009, 04:54 PM
Reg you got so excited whilst typing the word "fishnets" that you actually spelt my name wrong afterwards.......ha ha ha ha and yes, I did ask you to wear that.
i didnt and that coz i aint got "ass" on the brain you nonce

antnee
12-11-2009, 08:32 PM
Im 'racing' :wtf:

Captain-Codpiece-The-2nd
13-11-2009, 11:12 AM
Sweet! The shambles stable is growing. You racing tonight or just sat?
________
Honda nsr50 history (http://www.honda-wiki.org/wiki/Honda_NSR50)

The Doctor
13-11-2009, 01:10 PM
I think he meant he was racing at the time he typed that post, in which case he'll have snapped it & blown the electrics in the rain by now so the track'll be safe tonight. :lol:

Dave Dodd
13-11-2009, 01:21 PM
:lol::lol::lol::lol: nice one Doc :lol:(I wrote this and all i could think off was the big guy off Doc martin)

Is it The Doctor cos you like Doctor Who (Tom Baker so you need a big old scarf) or Doc Martin (which hes completely OCD but bonkers aswell) :lol::lol:

Captain-Codpiece-The-2nd
13-11-2009, 01:41 PM
I think you should turn your Losi into an RC Tardis to show your love for The Doctor.......lol
________
TOYOTA A TRANSMISSION SPECIFICATIONS (http://www.toyota-wiki.com/wiki/Toyota_A_transmission)

reg
13-11-2009, 02:16 PM
i think its because of the surgical way he goes about working on his car:woot:.........all the tools layed out on a towl:wuball the removed bits in a tidy pile ready for team OCD desposal team to remove it from the work area and write a report into if it was poor workmanship:oor it was because lloyd has just ramed him off the track:thumbsup:

antnee
13-11-2009, 03:51 PM
Sweet! The shambles stable is growing. You racing tonight or just sat?


Actually racing! Lipos on charge atm!

reg
13-11-2009, 03:54 PM
:thumbsup:................do you need any wheels and tryes gluing:woot::p

antnee
13-11-2009, 03:56 PM
Just done those!

Captain-Codpiece-The-2nd
13-11-2009, 04:45 PM
Gonna actually charge them then this time eh Ant? I thought you might prefer the usual method of running them to 5.5v and wondering why your car is crawling to Halt...lol
________
Iolite (http://vaporizer.org/portable)

usagi
13-11-2009, 05:19 PM
What time is booking in tomorrow?

pat*1
13-11-2009, 05:32 PM
What time is booking in tomorrow?
I think its open from about 9.30 am...but im sure someone else will comment in a bit.

usagi
13-11-2009, 06:03 PM
Thank you. :D

The Doctor
14-11-2009, 12:18 AM
Doors open at 9, racing starts at about 10.30 (ish).

Dave Dodd
14-11-2009, 10:24 AM
You know this doors open thing its like watching the gold channel (repeated loads ) http://cdn.content.sweetim.com/sim/cpie/emoticons/000202BD.gif (http://www.sweetim.com/s.asp?im=gen&lpver=3&ref=10)

mark christopher
14-11-2009, 07:55 PM
2 bloody hours to get home, m1 was still shut!!
brilliant day again tho
cheers all

Spoolio
14-11-2009, 10:52 PM
When I pulled up at a row of cones saying "ROAD CLOSED" at the entry slip to J30 on the M1 I was in two minds whether to say "sod that" and just go home again. Glad I took a scenic detour to get down to J29 though.

:thumbsup: to the WBMCC crew. Excellent meeting again, nice to see it's getting more people in. Thought the track was good this time, looked simple but was tricky to nail consistently - the triple in particular looked a doddle but was a bitch to get right, I reckon that marshall point and the one after the crashmat were definately where all the action was. Looking forward to the next one.

antnee
14-11-2009, 11:08 PM
I couldn't get the triple right all day!

Sorry if I annoyed anyone with ringing lloyds phone lots (general lee sc10)

deepdale11
15-11-2009, 07:28 AM
Yep, round two was another great day,that triple was a BITCH!!.......roll on round round 3!

reg
15-11-2009, 01:43 PM
It was another good round dispite only putting 1 propper round in and snapping my chassis in half:cry:TEAM SHAMBLES(pat) pull off another top repair job(lloyd your sacked big boy)...........well done MRS H :thumbsup:it was a good final even with the dodgy marshalling:p...........hopfully see you next time:woot:

deepdale11
15-11-2009, 02:07 PM
Yeah, well done Pat with the superglue, i was shocked it stayed together!!! but it did look like you had trouble with your steering......or was it that you had no sleep and you was falling asleep during the final.......lol.

Garry
15-11-2009, 02:46 PM
Great meeting guys. :D Had a lot of fun all day trying to get past Lee's truck but my poorly clicky diff wasn't playing ball. And I was under the weather too :lol:

More lino next time please, slippery stuff rocks. :)

mark christopher
15-11-2009, 03:06 PM
It was another good round dispite only putting 1 propper round in and snapping my chassis in half:cry:TEAM SHAMBLES(pat) pull off another top repair job(lloyd your sacked big boy)...........well done MRS H :thumbsup:it was a good final even with the dodgy marshalling:p...........hopfully see you next time:woot:
sorry reg, had to let the lady win.... just put you back where you came off the track :p

deepdale11
15-11-2009, 03:59 PM
Don't be sorry........I think he was trying to cut a corner!! :lol:

sorry reg, had to let the lady win.... just put you back where you came off the track :p

deepdale11
15-11-2009, 04:02 PM
Yeah, I think we will get some lino for next time as them boards didn't seem that slippery?

Great meeting guys. :D Had a lot of fun all day trying to get past Lee's truck but my poorly clicky diff wasn't playing ball. And I was under the weather too :lol:

More lino next time please, slippery stuff rocks. :)

reg
15-11-2009, 05:05 PM
sorry reg, had to let the lady win.... just put you back where you came off the track :p
you didnt have to she did that on her own....................

reg
15-11-2009, 05:10 PM
Don't be sorry........I think he was trying to cut a corner!! :lol:
i was waiting so not to make any time unlike most:p........and then lost more time..........:thumbdown:

Dave Dodd
15-11-2009, 05:49 PM
http://cdn.content.sweetim.com/sim/cpie/emoticons/000201F6.gif (http://www.sweetim.com/s.asp?im=gen&lpver=3&ref=10) track shame i had to work, would have been nice to try it.


thought Pat did a fantastic job on Marks chassis, he just had to remember not to touch anything afterwards http://cdn.content.sweetim.com/sim/cpie/emoticons/00020345.gif (http://www.sweetim.com/s.asp?im=gen&lpver=3&ref=10)

mark christopher
15-11-2009, 07:11 PM
i was waiting so not to make any time unlike most:p........and then lost more time..........:thumbdown:
ah but technically you had an accident, and were setting off behind where you were distance wise without having an accident, so you lost nothing for a mistake, till i put you back :p

reg
16-11-2009, 10:10 AM
ah but technically you had an accident, and were setting off behind where you were distance wise without having an accident, so you lost nothing for a mistake, till i put you back :p
you are correct but what is good for one should be good for everyone...........

mark christopher
16-11-2009, 11:38 AM
i do try to be the same for everyone i marshal, unfortunatly im unable to do em all.

Captain-Codpiece-The-2nd
16-11-2009, 11:59 AM
Great days racing again, sorry I couldn't hang around to pack up, I had to make Swansea in 3 hours, :o

Mark can you get some pics of your shambolic bodgery on the other thread? That was a true work of art!

Pat you managed an entire days racing without complaining about anything, are you feeling ok? :lol:

Roll on round 3.......
________
K100 (http://www.bmw-tech.org/wiki/BMW_K100)

Benh
16-11-2009, 12:15 PM
I saw this incident and I thought Reg did the right thing. He landed on his wheels after a tumble, and no marshall was required. There was no point in trying to go back over the markings, it's not a good thing to do and can also cause more harm.

He rightly waited to ensure no unfair advantage gained. Just as the car that was next to him (before the tumble) had came round to where he was waiting, he was picked up and put back the other side of the marking. (Double penalty) I thought this was unfair. If there is a something not right, it should be addressed by the Race Director not the marshall. If the marshalls start deciding what's right and what's not, then the scope of interpretation is going to be huge and it opens the door for bias, whether intentional or not.

Robbiejuk
16-11-2009, 12:46 PM
Sigh your all starting to sound like some of the touring car drivers we had on sunday...

What happened happened end of story. And personally I think Eboney deserved to win that final as she drove really well with a lot pressure from the drivers behind her all the way through the race, she lapping consistently while everyone else was making mistakes behind her.

Anyways back to saturdays meeting, how good was the track? Anything we need to do more or less of, anybody not happy with anything (apart from reg obviously :D) What can we iomprove on for round three?

Give us your thoughts guys..

Benh
16-11-2009, 02:44 PM
Sigh your all starting to sound like some of the touring car drivers we had on sunday...

What happened happened end of story. And personally I think Eboney deserved to win that final as she drove really well with a lot pressure from the drivers behind her all the way through the race, she lapping consistently while everyone else was making mistakes behind her.

Anyways back to saturdays meeting, how good was the track? Anything we need to do more or less of, anybody not happy with anything (apart from reg obviously :D) What can we iomprove on for round three?

Give us your thoughts guys..

Robbie,

Really enjoyed the meeting. Thank you. Liked the size of the track, the technical sections we loved/hated. Loved them because they were good, hated them because I couldn't nail them consistently. But that's my fault, not the tracks.

If I could put in 1 suggestion. At the top of the straight, there was a linkage on the track markings poking out (inside of the corner about a foot into the track). A couple of us who are more used to high rostrums, really struggled with it.

Other than that, we are looking to make another 5.5 hour round trip to make the next one. Hopefully prepare a bit better and drive a bit better too.:blush:

mark christopher
16-11-2009, 03:16 PM
I saw this incident and I thought Reg did the right thing. He landed on his wheels after a tumble, and no marshall was required. There was no point in trying to go back over the markings, it's not a good thing to do and can also cause more harm.

He rightly waited to ensure no unfair advantage gained. Just as the car that was next to him (before the tumble) had came round to where he was waiting, he was picked up and put back the other side of the marking. (Double penalty) I thought this was unfair. If there is a something not right, it should be addressed by the Race Director not the marshall. If the marshalls start deciding what's right and what's not, then the scope of interpretation is going to be huge and it opens the door for bias, whether intentional or not.

ben, and all i marshal as i do for 10ic , where we have a written rule, if the car leaves the track it must return from where it left.
If its not aceptable i can allways put my oakleys on and stand at the end of the rostrum/table top and look asleep as one marshal did

Robbiejuk
16-11-2009, 05:28 PM
Robbie,

Really enjoyed the meeting. Thank you. Liked the size of the track, the technical sections we loved/hated. Loved them because they were good, hated them because I couldn't nail them consistently. But that's my fault, not the tracks.

If I could put in 1 suggestion. At the top of the straight, there was a linkage on the track markings poking out (inside of the corner about a foot into the track). A couple of us who are more used to high rostrums, really struggled with it.

Other than that, we are looking to make another 5.5 hour round trip to make the next one. Hopefully prepare a bit better and drive a bit better too.:blush:

Problem is with the corner markers we have is that if you hit the tubes attached to it they move a bit and it makes the corners go out of shape. sometime they go flat and sometimes they stick right out. You get used to it after a while but we could also put some reebok steps on the rostrum to raise you up a bit if your struggleing. I guess we are used to it wbmcc as we race the same first corner every week. :lol:

pat*1
16-11-2009, 05:41 PM
Rob i thought the track was great,especially after the first corner got altered.it was difficult in places and easy in others just as it should be.
Lloyd,i dont allways moan you git.
Mark's incident as i saw it,might of had a different outcome if he was racing someone else...
Well done to all the drivers as i thought it was a good days racing...
Rob i cant believe you had problems with touring car drivers,ive all ways thought they were the most helpfull of all the different classes of drivers....ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha......

reg
16-11-2009, 05:47 PM
Great days racing again, sorry I couldn't hang around to pack up, I had to make Swansea in 3 hours, :o

Mark can you get some pics of your shambolic bodgery on the other thread? That was a true work of art!

Pat you managed an entire days racing without complaining about anything, are you feeling ok? :lol:

Roll on round 3.......
Ben i couldnt have put it better my self:thumbsup:

i took the pics on robs camera:woot:.................10ic you must be fit if thats the rule........every ic car iv seen go off usually ends up 50meters from where it went off :woot:....................Eboney did deserve to win as i said and would have done even without the marshalgate hahahahahahahaha..............."If its not aceptable i can allways put my oakleys on and stand at the end of the rostrum/table top and look asleep as one marshal did"......................its probly a good job he did as you would have spent more time being put back on the table top:p....see you all next time

antnee
16-11-2009, 11:58 PM
I think we need to secure the triple better, as the boards weren't taped it made it hard to get a good line.

As we said I think some lino is in order, can we get some funky colour or black and white squares (tiled effect!) :D

Spoolio
17-11-2009, 07:29 AM
Problem is with the corner markers we have is that if you hit the tubes attached to it they move a bit and it makes the corners go out of shape. sometime they go flat and sometimes they stick right out.

Nah, I think the prob with THAT corner was that the link section was actually inserted into the pipes the wrong way round so the flexi join was butting out onto the racing line rather than facing the other way where it would have just been in a dead zone. I noticed it too after round 2 I think but no point moaning now, we really should have had a word at the time. I think a slighly higher rostrum would help. It was a shame the weather really let us down this time, last time the natural light was ace, this round it deffo needed some assistance so :thumbsup: to whoever took the exec decision to put put the lights on. Totally agree, Ebony deserved to win as she just went round like clockwork while most of us kept insisting on giving the marshalls something to do.

Captain-Codpiece-The-2nd
17-11-2009, 08:54 AM
The only thing that could've made the day better for me was if Mr. Brown bought some more of his amazing muffins. :drool:

Oh yeah and if those Dremel SC10's slowed down enough for me to catch up he he
________
Ram srt-10 (http://www.dodge-wiki.com/wiki/Dodge_Ram_SRT-10)

reg
17-11-2009, 09:14 AM
The only thing that could've made the day better for me was if Mr. Brown bought some more of his amazing muffins. :drool:

Oh yeah and if those Dremel SC10's slowed down enough for me to catch up he he

i was looking forward to one of thoese to but i think he was having a bad day,i think he had cleaned his wires that much it rubbed all the coulour off them and he didnt know which one went where:cry:........did you get it sorted Chris

Robbiejuk
17-11-2009, 12:44 PM
Nah, I think the prob with THAT corner was that the link section was actually inserted into the pipes the wrong way round so the flexi join was butting out onto the racing line rather than facing the other way where it would have just been in a dead zone. I noticed it too after round 2 I think but no point moaning now, we really should have had a word at the time. I think a slighly higher rostrum would help. It was a shame the weather really let us down this time, last time the natural light was ace, this round it deffo needed some assistance so :thumbsup: to whoever took the exec decision to put put the lights on. Totally agree, Ebony deserved to win as she just went round like clockwork while most of us kept insisting on giving the marshalls something to do.

Hmm problem is if I raise the rosturm up I then by health and safety law have a guard rail on the the front. At the moment it is bang on the level where it is not required to have one.

Sorry a bout the lights normally we have them turned on from the start I just didn't notice that they weren't turned on in the morning. Time to order some PIR's and control boxes for the school :thumbsup:

We will leave some reebok steps out for the more vertically challenged of you to use on the rostrum but you will use these at your own risk.

With regards to the offending corner item if it was put the other way, rather than a having piece of plastic to bounce off you would would have two wooden blocks to bounce off insteas and it would be bye bye wishbone. I will make sure that the double sided corner we have is put in there as this doesn't flex as much as the single sided ones.

After the racing on saturday we found uber amounts of holes in the carpets. If we are going to be able to keep putting these meetings on then we are going to need you guys to start protection on your showck towers so as to limit tears in the carpets, So if you could make some nice lexan protectors for your front shock towers on the buggies and anywhere you have a screw facing forward which has a bit of thread sticking out can you add a plastic nut to the end to stop them diggin into the carpet in case of a roll over then that would be very much appreaciated.

Other than that get those entries in for the next meeting in december!!

Robbiejuk
17-11-2009, 01:32 PM
http://www.wbmcc.com/images/phocagallery/rd2ioffrc/thumbs/phoca_thumb_l_14%20%2015%20november%20pictures%20i orc%20and%20schumacher%20030.jpgPictures are up on the site btw.
http://www.wbmcc.com/index.php?option=com_phocagallery&view=category&id=13:rd2-14.11.09&Itemid=72

reg
17-11-2009, 03:17 PM
Rob did the pics of the shambolic repair come out :thumbsup:.................i dont think i will be racing this side of christmas due to the 1peace chassis becoming 2:cry:...................hopfully father christmas will bring me a new one:thumbsup:

Robbiejuk
17-11-2009, 05:04 PM
why don't you just convert it back to a b4?:thumbsup:

Unfortunatly the shambolic repair didn't really come out very well, completely out of focus and no flash makes for a very dull picture.

Benh
17-11-2009, 05:41 PM
We will leave some reebok steps out for the more vertically challenged of you to use on the rostrum but you will use these at your own risk.


:lol: The rostrum is fine. Only mentioned as we are used to 6 footers and was looking for excuses;). We don't have any indoor tracks in the EoE. In fact we barely have an off road scene, but that's another story!


With regards to the offending corner item if it was put the other way, rather than a having piece of plastic to bounce off you would would have two wooden blocks to bounce off insteas and it would be bye bye wishbone. I will make sure that the double sided corner we have is put in there as this doesn't flex as much as the single sided ones.


I think the corner piece you had was perfect, it just needed the top marker to be pulled across slightly. Here's a very crude drawing.

10300[QUOTE=Robbiejuk;311361]

reg
17-11-2009, 07:35 PM
why don't you just convert it back to a b4?:thumbsup:

Unfortunatly the shambolic repair didn't really come out very well, completely out of focus and no flash makes for a very dull picture.
coz i let antnee use the shock towers and he managed to snap them both:woot:

Robbiejuk
17-11-2009, 07:50 PM
[QUOTE=Benh;311540]
I think the corner piece you had was perfect, it just needed the top marker to be pulled across slightly. Here's a very crude drawing.

10300

Thats how it supposed to be as in the second sketch, as I said earlier the problem is if one of the two connecting pipes get hit it either stretches the corner flat or does what it did. Just needs putting back right when it is hit.

chris brown
17-11-2009, 09:21 PM
Yes, that will teach me not to clean those wires so much.
Yes, a bad day and a smoked speedo.
Yes, borrowed Lloyds car and broke that.
Yes, will be there next round.

Dave Dodd
17-11-2009, 10:54 PM
why don't you just convert it back to a b4?:thumbsup:

Unfortunatly the shambolic repair didn't really come out very well, completely out of focus and no flash makes for a very dull picture.

will have a look on my mums camara, I took a couple of pics of said repair :thumbsup:

antnee
17-11-2009, 11:23 PM
coz i let antnee use the shock towers and he managed to snap them both:woot:

Daves getting some in, I will get you one if ya like?

reg
18-11-2009, 08:54 AM
Daves getting some in, I will get you one if ya like?
its ok mate......i would need other stuff to build it back up so dont worry,but thanks anyway:thumbsup:

Captain-Codpiece-The-2nd
18-11-2009, 10:19 AM
Lets have a shambles evening and fix it properly until you get a replacement. I would say some meccano, fibreglass sheet, araldite, and it'll be good as new! Team shambles simply will not tolerate a no show due to mechanical failure! Only moaning girlfriends and being to poor are acceptable excuses.

And Chris I think the X6 was just allergic to being driven so precisely. she clearly was confused and uncomfortable so just faked injury to get out of having to do anymore. Now if you had bounced it off every other car on the track and slung it round corners sideways it wouldn't have broken! :thumbsup:
________
HERBAL VAPORIZER FORUM (http://vaporizer.org/forum/herbal-vaporizers/)

mark christopher
18-11-2009, 12:05 PM
its ok mate......i would need other stuff to build it back up so dont worry,but thanks anyway:thumbsup:
reg i got the remains of a b4 from a conversion, what bits u need?

Robbiejuk
18-11-2009, 01:01 PM
And Chris I think the X6 was just allergic to being driven so precisely. she clearly was confused and uncomfortable so just faked injury to get out of having to do anymore. Now if you had bounced it off every other car on the track and slung it round corners sideways it wouldn't have broken! :thumbsup:

Make sure you lend him a car on friday night, need to slow the O.C.D team down. Lend him your cat

Captain-Codpiece-The-2nd
18-11-2009, 03:04 PM
If he used my cat, it wouldn't even make it to the start line! Which reminds me, anyone want to buy a cat sx?
________
Bmw f650cs (http://www.bmw-tech.org/wiki/BMW_F650CS)

antnee
18-11-2009, 03:34 PM
If he used my cat, it wouldn't even make it to the start line! Which reminds me, anyone want to buy a cat sx?
Please make a for sale thread on here and use that in the 'pitch'

antnee
18-11-2009, 04:35 PM
Lino sorted, all 15.5x2m of it :thumbsup:

Edit; it probably weighs the same if not more than the carpets and I dropped it on my foot :(

Robbiejuk
18-11-2009, 05:15 PM
Nice one we will cut it into three meter lengths and then we should be able to do two and a bit corenrs with it :thumbsup: Plus it will be easier to carry then to.

Captain-Codpiece-The-2nd
18-11-2009, 05:22 PM
Another bonus is that if anyone drops their food on the lino corners it will just wipe off, ie Chris' stud-muffins.
________
Yamaha dx1 specifications (http://www.yamaha-tech.com/wiki/Yamaha_DX1)

mark christopher
18-11-2009, 05:49 PM
hope its a pretty colour lol

reg
18-11-2009, 06:04 PM
reg i got the remains of a b4 from a conversion, what bits u need?
Thats very kind Mark but i cant be bothered swopping everything then back again........the wife said it will be worth my while not going till after christmas:thumbsup:

reg
18-11-2009, 06:10 PM
Lets have a shambles evening and fix it properly until you get a replacement. I would say some meccano, fibreglass sheet, araldite, and it'll be good as new! Team shambles simply will not tolerate a no show due to mechanical failure! Only moaning girlfriends and being to poor are acceptable excuses.

And Chris I think the X6 was just allergic to being driven so precisely. she clearly was confused and uncomfortable so just faked injury to get out of having to do anymore. Now if you had bounced it off every other car on the track and slung it round corners sideways it wouldn't have broken! :thumbsup:
All the bits are at the bottom of a big hole somewhere:woot:i will have to use the being to poor as christmas is comming and thats taking all tha money at the min:p

antnee
18-11-2009, 07:11 PM
Its some funky bluey colour

Captain-Codpiece-The-2nd
19-11-2009, 10:55 AM
Do we have to clean it with a mop?
________
Vapor genie vaporizer (http://vaporizer.org/reviews/vapor-genie)

antnee
19-11-2009, 11:14 AM
If you make it dirty, then yes. Although, I want to see you try and write your name in 11's on it!

reg
20-11-2009, 10:07 AM
http://lh5.ggpht.com/_6J6Viu0M2HQ/Svxy8LBcIiI/AAAAAAAAKLY/fJB_A7Wkro0/s912/IMG_8176.jpg

if only thoese TC guys all bought buggys:wub

Dave Dodd
20-11-2009, 11:32 AM
looks a good track Reg.. http://cdn.content.sweetim.com/sim/cpie/emoticons/00020110.gif (http://www.sweetim.com/s.asp?im=gen&lpver=3&ref=10)

could you imagine the set up time required, finish just in time for 1 race then time to pack away http://cdn.content.sweetim.com/sim/cpie/emoticons/000201E4.gif (http://www.sweetim.com/s.asp?im=gen&lpver=3&ref=10)

reg
20-11-2009, 11:52 AM
could you imagine the upror about how much tape we would use:p

Robbiejuk
20-11-2009, 01:18 PM
You don't need to tape astro turf down though it is bloody heavy.. as long as we layer it across each other following the driection of the track we will be fine :thumbsup:.

Anyways have you fixed your car yet REG? I have an old style chassis and nose palte you could borrow..

Captain-Codpiece-The-2nd
20-11-2009, 01:24 PM
Loving the random pumpkins on the left side as a corner marking.
________
MARIJUANA JOINT (http://howtorollajoint.net/)

Dave Dodd
20-11-2009, 02:32 PM
Loving the random pumpkins on the left side as a corner marking.
was it 1 of your designs :lol: :thumbsup:

shambles pumpkin corner...

reg
20-11-2009, 03:21 PM
You don't need to tape astro turf down though it is bloody heavy.. as long as we layer it across each other following the driection of the track we will be fine :thumbsup:.

Anyways have you fixed your car yet REG? I have an old style chassis and nose palte you could borrow..
iv not fixed it yet Rob......thanks for the offer but i need hing pins,front bulk head,front shock tower plus more new tires:thumbdown:........we cant afford to spend money on my hobbie at the min with Xmas on its way.........Pat have you not got some priceless tamiya i can thrape round :woot:

chris brown
22-11-2009, 11:27 AM
Dont think those are pumpkins. They look like medicine balls they have got from the sports hall store cupboards. Just think what we could have if we raided ours.
Mind, having said that I'm not sure how we could use 40 tennis rackets, 50 badminton rackets, 40 hockey sticks and about 100 different balls.

A job for team shambles me thinks.

reg
22-11-2009, 04:19 PM
i would hate to go and train with you chris if you think they are medicine balls:woot:

antnee
24-11-2009, 11:38 PM
Pics of worksops track if your interested

http://i55.photobucket.com/albums/g138/antnee-m/DSC01141.jpg
http://i55.photobucket.com/albums/g138/antnee-m/DSC01142.jpg
http://i55.photobucket.com/albums/g138/antnee-m/DSC01140.jpg