Acoms Technisport 2.4ghz Manual

[saxosim]

Hiya,

I bought an Acoms technisport 2.4ghz handset and receiver from a fellow member on Oople which is great but unfortunately it didn't come with any instructions. Please can anyone point me in the right direction to find one or could somebody kindly scan a copy of theirs for me and email it to me as a PDF or something?

Thanks, any help I would really appreciate it. Please PM me if you can help.

Kind Regards
Simon :thumbsup:

[T4miy4 Guy]

Not got a manual but this should help

1) Hold down the button on the back of the transmitter and turn it on. The power light on the transmitter should flash.

2) Hold down the button on the receiver and turn it on. Wait a second or two and let go. The receiver light should flash then stay either on or off. If it's ON press the button again to turn it OFF and you should now be able to control the servos from the transmitter.

3)Hold your throttle and steering where you want them to be and then press the button on the receiver again to turn the light ON. (assuming brakes on, full left)

3)Turn the receiver off. Turn the Transmitter off.

4) Turn the Transmitter back on, turn the receiver back on. The car should now go into it's normal operation and perform it's failsafe for 2 seconds at the settings you chose.

5) Test by holding throttle full on and turn the Transmitter off. Throttle should cut and the car should steer left.


Hope this helps

Andy

[DrPaul]

Let me have your email and I will send you a PDF. Paul :)

[saxosim]

Hi Andy and Paul, many thanks for the info will give it a try, Paul thanks PM sent.

Regards
Simon :thumbsup:

[racer2]

Hi guys' I was wondering if anyone could help me out with this problem' I bought a Carson Model Sport RC Petrol Car off ebay and with the car is a Acom Technisport 2.4GHZ controller but I don't have any instructions for the controller and cannot work out how to set it up and was wondering if someone might have it in pdf form if so I can give you my email address or if you could
point me in the right direction where I could down the instructions from. Thanks
in advance.


Keith

[Jimbuch2]

Hi I have just bought a acoms techniplus 2.4 with a dr-224 receiver but no instructions can anyone on here email me a copy or guide me to a we link

Thanks Jamie