View Full Version : BEC's.....
telboy
30-11-2009, 11:56 PM
.....which one basically?
Never had to use one before so no clue on them at all. :)
Marvin
01-12-2009, 12:00 AM
I'm using a Castle Creations BEC Pro, but that's just so I can output at 9.6V...
I'd always recommend the Castle stuff, though Flightpower will probably do a good BEC too. The standard Castle BEC would be enough for your set-up (easily!), and it's not too pricy either.
James
01-12-2009, 12:03 AM
I just used one of these tel: A 5/6v 3-5A UBEC
just from ebay.
Dont need one on the bigger dedicated speedos though
Marvin
01-12-2009, 12:13 AM
Is it capable of running 16.8V input though?
James
01-12-2009, 12:18 AM
it was for 14.8 on my application, i didnt see tels system?
telboy
01-12-2009, 12:47 AM
James, you have PM dude!. :)
offroadrc
01-12-2009, 12:50 AM
i use the hobbycity ubec 5s lipo max 5-6V to receiver works great in a 1/8 scale truggy, also with the hobbywing ez-Run 150esc i don't use a ubec cose there is allready a good one in the esc and i also don't use a fan on this esc on 6s lipo with a 1600kv motor.
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.