View Full Version : Setup needed for b4 at worksop indoor.
phil porritt
22-12-2009, 08:18 PM
Im new and struggling, anybody got any setups for worksop indoor please.
cheers phil.:confused:
Rich D
22-12-2009, 08:52 PM
Hi Phil
I think you go to Louth club ?
My B4 FT is set as follows
Plastic chassis
Silver springs all round
35 WT oil front no2 piston
30 WT oil rear no1 piston
wishbones level at front
driveshafts level rear
gearing 23/81 on Novak 7.5L
Lipo mounted towards the front ( foam pushing it forward )
I also run 30 degree castor blocks with one washer under the ballstud for the inner ink.
Trishbits brass blocks front and rear, lead under lipo.
I managed 4th in the B using the above setup with a bit of slipper advice from Mick Cragg ( Thanks Mick ! :) )
You`ll love the racing, just dont expect to do any good cos the standard there is incredible.
That should get you somewhere near :)
phil porritt
22-12-2009, 09:28 PM
Thanks for that mate, will be a great help to get me started. was struggling for front end grip on sunday, but was a great day. See you at Louth after xmas or worksop on the 3rd. cheers phil:thumbsup:
Rich D
22-12-2009, 10:15 PM
No worries Phil - they all understeer on power, thats the nature of the beast, its a matter of discipline with the throttle. Easier said than done though :)
Have a good Xmas. :thumbsup:
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.