View Full Version : “Ellis Stafford” X – 6² Championship Edition

24-12-2009, 10:29 AM
X Factory is proud to announce a special “Ellis Stafford” Championship Edition X–6² Conversion Kit has been shipped to dealers in U.K and France. This limited edition Kit celebrates Ellis fantastic back-to-back BRCA 2WD National championship titles and TQ at the 2009 Euros.


Now customers have the chance to buy the car that closely represents that which Ellis uses with all the optional tuning and cosmetic parts found on the champions buggy; however only one limited run batch of 50 of these special kits has been produced, so customers must act quickly before they are gone..
The buggy brings together all the standard features of the X6 Squared that have made the car so successful all over the world, including the mid motored concept, 4 gear transmission, LIPO-friendly one piece chassis design and many more unique features too.
We have added components from no less than nine outside manufacturers to bring you this kit, the full list of additional parts over and above the standard “K019 X6 Squared Conversion” are as follows;

E-Speed – ES001 Blue alloy rear camber links
E-Speed – ES002 Blue alloy motor plate brace
Dirtz Dialled Partz – DDP024 Blue alloy lightweight milled motor plate
Dirtz Dialled Partz – DDP025 Precision alloy suspension shims (2 sets)
Rudebits – Complete Brass Weight Distribution kit
X-Factory – XF1006 Plastic Chassis replaces graphite
X-Factory – XF1225 Quick Change LIPO battery retainer kit
X-Factory/MIP – XF2601 Steel trailing front wheel axles
X-Factory/MIP – XF5661 Extra Droop long rear CVD axles and spacers
Lunsford – complete set Titanium turnbuckles (6)
Lunsford – complete set Titanium broached ball studs (14)
Losi – A6016 Heavy Duty grey ballcups
J Concepts – JC0103 Front air dam/wing
Associated – AS9593 30 Degree front castor blocks
Ellis Spec – Wing mounts and AE Blue flanged washers for wing
Ellis Spec – roll bar mounting kit featuring a special slotted rear bulkhead,
titanium 1” sway bar links, ball joints and HD ballends
Decal Designs – Special Edition Ellis Spec decal sheet

A special addendum to the instruction manual written by Ellis himself!
Step-by-step, Ellis shows you the slight changes that produce Championships.
Purchased separately these option parts would cost over £300 and you still would need the Conversion Kit!!

XFK020 – “Ellis Stafford Championship Edition” X62 Conversion Kit
UK RRP £334.99
Available to order now at all good X-Factory UK stockists (only available while stocks last).

Darren Boyle
24-12-2009, 11:17 AM
Thanks Jimmy :thumbsup:

Of course, rushing around as ever, we did miss one part of the list from what is included in the conversion kit and that is the Losi Red Shock Pistons, which will of course fit both Losi and AE shocks.... :thumbsup:

Merry Xmas to you all..

25-12-2009, 10:50 PM

No mention of a carbon front mount????

My cars still better spec than that one :)

Good price though matey

26-12-2009, 09:00 AM
It was mentioned in the X6 thread. K-Factory dont do it anymore apparently. Good job I've got a handful in my pitbox.

Garry Driffill
26-12-2009, 01:06 PM
There must be anouther aftermarket one availaible in place of the K-Factory one?

Darren Boyle
26-12-2009, 11:14 PM
Not yet......but maybe soon!! (:thumbsup: we shall see)

Garry Driffill
27-12-2009, 12:33 PM
:p just the response i was looking for :p

:woot: :thumbsup:

Darren Boyle
30-12-2009, 06:47 PM

The kits arrived this afternoon, have all had the Rudebits weight kits, option parts and decal sheets added and then sealed and finished off with the personally autographed Ellis label.

All pre-ordered kits and dealer orders have been shipped tonight via UPS and "should" all be out for delivery tommorow. (We still have some left from the shipment for anyone who thought they may had missed out or who had not ordered one just yet)