Big G
24-12-2009, 06:36 PM
NOW SOLD. THANK YOU FOR THE INTEREST :)
It's time to reduce the number of cars I have so the SC10 has to go.
Owned since new so comes with the box, manual and original tools. Raced mainly indoors on carpet, but I have done a few outdoor events which it ran well in.
Spares include NIP front wishbones, 1 LHS front wishbone, 1 RHS rear wishbone, all 6 turn buckles (new, but not in packet), Original rear arm mount, spare front and rear hubs + caster blocks (again new, but not in packets), driveshafts and little orange rings and 1 NIP turn buckle.
The SC10 has been fitted with blue alu front bulkhead, rear arm mount, finned heatsink motor mount and front hinge pin brace. I also have the blue alu steering rack in my box, but not fitted. It has a few blue screws to tart it up :blush:
The truck has seen it's fair share of racing indoors and the chassis/top plate were replaced with brand new items after they snapped (seems a common thing at our club lol) The shell has got a few cracks, but is good enough to use. The rear tyres completely wore down to slicks so I glued some old mini pins onto them for a bit of a giggle.
http://i937.photobucket.com/albums/ad212/Dizzie20vt/IMG_3545.jpg
http://i937.photobucket.com/albums/ad212/Dizzie20vt/Hereford%20SC10%20open/IMG_0146-1.jpg
Truck is supplied rolling chassis. If you want servo, receiver (40mhz only sorry), speedo and motor I have these so we can talk a deal.
Looking for £120 posted
or £100 without spares
Gareth
07816 895164 or PM
I'm based in HR6
It's time to reduce the number of cars I have so the SC10 has to go.
Owned since new so comes with the box, manual and original tools. Raced mainly indoors on carpet, but I have done a few outdoor events which it ran well in.
Spares include NIP front wishbones, 1 LHS front wishbone, 1 RHS rear wishbone, all 6 turn buckles (new, but not in packet), Original rear arm mount, spare front and rear hubs + caster blocks (again new, but not in packets), driveshafts and little orange rings and 1 NIP turn buckle.
The SC10 has been fitted with blue alu front bulkhead, rear arm mount, finned heatsink motor mount and front hinge pin brace. I also have the blue alu steering rack in my box, but not fitted. It has a few blue screws to tart it up :blush:
The truck has seen it's fair share of racing indoors and the chassis/top plate were replaced with brand new items after they snapped (seems a common thing at our club lol) The shell has got a few cracks, but is good enough to use. The rear tyres completely wore down to slicks so I glued some old mini pins onto them for a bit of a giggle.
http://i937.photobucket.com/albums/ad212/Dizzie20vt/IMG_3545.jpg
http://i937.photobucket.com/albums/ad212/Dizzie20vt/Hereford%20SC10%20open/IMG_0146-1.jpg
Truck is supplied rolling chassis. If you want servo, receiver (40mhz only sorry), speedo and motor I have these so we can talk a deal.
Looking for £120 posted
or £100 without spares
Gareth
07816 895164 or PM
I'm based in HR6