Where to put weight on a B4?

[Charlie Ware]

Hi all,
Just got myself a Factory Team B4.
I've put some ugly 10gram sticky weights all over it, but without really knowing what i'm doing!!!
Has anyone got any good suggestions as to:
Where to put the weights?
How much weight to add?
If I had to buyhe Rudebits/Trishbits Bulkheads, what combination would be a good starting point?

Many Thanks
Charlie Ware

[DaSloth]

Ive just put some weight in the bulkhead and on the servo

[raine]

if got a yeah racing bulkhead and the yeah racing steering set.
i add 25g on the bulkhead 10 on the servo.
25 in the rear and around 35 on the transponder (11g) / reciever ( 8g ) side ... my gm genius weights about 85g

[rob m]

i have 20g on servo and 15g just in front of servo. then balanced receiver weight to speedo to be able to set corner weights easier.

[kwark]

hi,

where can i add weight in the back? -there is no space?!

kwark.

[steelie600]

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Dont put weight at the back these wheelie enough as it is.

ive got the rude bits bulk heads, servo underbrace, battery strap and 15g on rx side for side to side balance. I also have another 30g on the servo and 20g right at the front under the brace and that just stops the wheelies!!

[j.m.]

http://www.oople.com/rc/photos/b4wife/

[kwark]

thanks!

my weights are to big, thats was the problem...

[Rikus]

Feed it:woot: Mc Donalds:p:thumbsup: