PDA

View Full Version : vega v3 help!


MK999
26-05-2007, 08:46 PM
I have a second hand vega v3 with no manual, does anyone either know off hand which way they wire up, or have an old manual handy?

Chequered Flag Racing
26-05-2007, 09:43 PM
get in touch with Centre Point (TTech) if no one can help

JCJC
26-05-2007, 09:52 PM
Should have this...........but will have to be tomorrow, good little speedo, we only had problems when we droped to 10 turn motors (?), 12 turn we ran no problems. (Should have been no limit!).

Mick

MK999
26-05-2007, 09:59 PM
thanks for the help guys, i actually figured it out in the end from a photo of a v2 :) B4 is ace, fun already and i haven't got it out of the drive yet ! :D But i should be wary of running anything lower than 12 turn in it?

JCJC
27-05-2007, 08:17 AM
http://picasaweb.google.com/MickJackson2007/VegaSpedo?authkey=pYw2_ce3XJQ

I'le leave this on picasa for a couple of weeks, sorry, re:10 turns above, we had no trouble with our V3's (ran two of em), it was our "factory" that started to cut out on 10 turn, much smaller and would still use it on 12 & above. It was getting late last night and half a bottle of red.............:cool:

and 12 turn was plenty in the B4, we were using 10's in 4 wheel drive

MK999
27-05-2007, 09:24 PM
Cheers, have it all wired up now, it's fairly easy to remember once you figure it out, but i'll download those 2 scans anyway :p

Chequered Flag Racing
29-05-2007, 08:25 AM
http://picasaweb.google.com/MickJackson2007/VegaSpedo?authkey=pYw2_ce3XJQ

I'le leave this on picasa for a couple of weeks,

while your on send it to RC Documents (http://www.rcdocuments.com/)

JCJC
29-05-2007, 10:42 AM
Beaut !! thats the site I had in my dreams............I know!:p