Lipo Connectors

[Fat Corgi]

Hi everyone,
Does anyone know where I can get 90 degree 4mm gold bullet connectors in the UK?

[chrispattinson]

+1 for my link wire on my 511

[bigred5765]

just solder the wires to std connectors at 90 degrees

[Darren Boyle]

TEAM EPIC do some which are designed to take the wire at 90 degrees

Part numnber is TEP2501 - £2.49 per pair

Link to them on the EPIC sire here - http://www.teamepiconline.com/shop/item_new.asp?item=TEP2501

[chrispattinson]

just solder the wires to std connectors at 90 degrees

I do that at the mo Carl, just wondering if there was something out there that did it differently.

[94eg!]

I simply take my dremel with a stone grinding head and cut a big notch out of the standard bullet where the wire enters. Then I can solder the wire in at 90* and still have a nice gold colored surrounding the wire...

Either that or simply solder it to the top of the post at 90* as someone else said. Either way works perfectly...

[bodgit]

http://www.helihobby.com/commonImages/partsMain/LP-C1001A.jpgTry drilling you own like this http://www.helihobby.com/assets/images/autogen/clearpixel.gif

[94eg!]

TEAM EPIC do some which are designed to take the wire at 90 degrees

Part numnber is TEP2501 - £2.49 per pair

Link to them on the EPIC sire here - http://www.teamepiconline.com/shop/item_new.asp?item=TEP2501

Those are intellect 4mm pin connectors that are rebadged in the US by Team Epic. You could probably save money by cutting out the middle man...

http://rcmarket.com.hk/product_info.php?products_id=6510&osCsid=rfde57nvflflf0o5tkgjap6dp2

[Darren Boyle]

Those are intellect 4mm pin connectors that are rebadged in the US by Team Epic. You could probably save money by cutting out the middle man...

http://rcmarket.com.hk/product_info.php?products_id=6510&osCsid=rfde57nvflflf0o5tkgjap6dp2

Yes but the ones you show still need to be shipped to the UK, these ones "badged" by TEAM EPIC are just £2.49 per pair are already here in the UK in all stores who carry EPIC products, even with inland postage on top they would be no more than £3.50 for a pair (which is far less than most other 4mm type connectors) and more than likely delivered to your door the next day. At $2.40 the ones you show would need to get to the UK for less than £1.90 postage plus would take longer to arrive due to the distance. For me I cannot see the benefit in getting somthing like this from overseas at all.......

[DCM]

I never new the angle of wire entry, ontop of a 4mm connector, was such a hottly debated issue lol..... I have soldered the wires at 90' on most of my buggies, to clear shells.