Log in

View Full Version : Official Pictures of the DEX410R!!

Hulk
10-03-2010, 06:11 PM
Check this out, official pictures of the Durango DEX410R from the Team Durango website!

Looks sweet and at a street price of £210 its a bargain!

http://www.team-durango.com/blog/ :thumbsup:

Craig Collinson
JohnM
10-03-2010, 06:45 PM
Craig, I hope you drive faster then you post news, your a couple of hours late with this;):thumbsup:
mark christopher
10-03-2010, 07:16 PM
http://www.team-durango.com/blog/wp-content/uploads/2010/03/DEX410R_6_annotated-011-1024x682.jpg
Hulk
10-03-2010, 07:18 PM
What can i say Mark, busy times at wrk. Im still in the office now! :cry:
Beanie
10-03-2010, 07:27 PM
These do look very nice....coming from 1/8 then alloy chassis, proper CVD driveshafts and gear diffs are more my bag! Why the front hex but a rear pin for drive? Why not the same for both??
Also, do these take saddle packs?
freud
10-03-2010, 07:32 PM
http://images.imagehotel.net/s1nsd8k6k8.jpg (http://www.imagehotel.net/?from=s1nsd8k6k8.jpg)
peetbee
10-03-2010, 07:40 PM
those alloy shock towers look thin and mighty bendy!
mark christopher
10-03-2010, 07:45 PM
These do look very nice....coming from 1/8 then alloy chassis, proper CVD driveshafts and gear diffs are more my bag! Why the front hex but a rear pin for drive? Why not the same for both??
Also, do these take saddle packs?
there used as there a standard fitment type, much like rally cross 17mm hexes

yes saddle only
mark christopher
10-03-2010, 07:45 PM
those alloy shock towers look thin and mighty bendy!


there felt very stiff when i tried to flex em!
mark christopher
10-03-2010, 07:46 PM
What can i say Mark, busy times at wrk. Im still in the office now! :cry:
do you mean john?
rcardoso
10-03-2010, 09:48 PM
Do you know if lipo spec 2010 holder is direct fit to dex410 ??
And also are these cvd better than on dex410?
Thank you
/tobys
10-03-2010, 10:16 PM
notice no roll bars - are these critical on the "premium" DEX410 and so a 'must buy' on the R? :confused:
dex410usa
10-03-2010, 11:15 PM
Looks very nice!!!!!!!! So many people are going to buy it now. I have a question how can i make my dex410 fit a 25mm battery????? can i buy parts from dex410r to make that work?

Thanks
HyperFX
11-03-2010, 03:06 AM
No shock, outdrive, or cvd boots, but that's an easy upgrade.
Alu towers might bend, but might not break as easily. Still, an easy upgrade.
I want the 2mm pin shafts/cvd's, plastic braces, and 25mm battery strap for my 410.
They did a great job with the 410R! But, what else is new?!! TD Rocks!
JohnM
11-03-2010, 07:27 AM
notice no roll bars - are these critical on the "premium" DEX410 and so a 'must buy' on the R? :confused:

Not used mine yet, so I wouldn't say they are a must buy, but then different tracks, different drivers, might be a different story.
JohnM
11-03-2010, 07:28 AM
do you mean john?

There really is no hope for the lad is there Mark!
nikos
06-04-2010, 07:48 AM
Can I modify my DEX410 with the new 25mm battery strap to fit my lipos?
Which parts are required, if this mod. would be OK ?
telboy
06-04-2010, 07:21 PM
As far as I know, the spur/slipper sit higher on the 'R'. So I would think that the centre mount is a touch higher so would have to be purchased to fit the deeper LiPo's.

I could be wrong though, so don't take my word for it.:lol:
wacattack
07-04-2010, 07:03 PM
As far as I know, the spur/slipper sit higher on the 'R'. So I would think that the centre mount is a touch higher so would have to be purchased to fit the deeper LiPo's.

I could be wrong though, so don't take my word for it.:lol:

Correct sir